SMC Networks 10/100 manual 122

CONFIGURING THE SWITCH

•State (CLI) – Shows if this VLAN is enabled or disabled.

-Active: VLAN is operational.

-Suspend: VLAN is suspended; i.e., does not pass packets.

•Add – Adds a new VLAN group to the current list.

•Remove – Removes a VLAN group from the current list. If any port is assigned to this group as untagged, it will be reassigned to VLAN group 1 as untagged.

Web – Click VLAN, VLAN Static List. To create a new VLAN, enter the VLAN ID and VLAN name, mark the Enable checkbox to activate the VLAN, and then click Add.

CLI – This example creates a new VLAN.

Console(config)#vlan database 3-122

Console(config-vlan)#vlan 2 name R&D media ethernet state active 3-123

Console(config-vlan)#end
Console#show vlan
VLAN Type		Name	Status	Ports/Channel groups
---- ------- --------------			-------	----------------------
1	Static	DefaultVlan	Active	Eth1/ 1	Eth1/ 2	Eth1/ 3
				Eth1/ 4	Eth1/ 5	Eth1/ 6
				Eth1/ 7	Eth1/ 8	Eth1/ 9
				Eth1/10	Eth1/11	Eth1/12
				Eth1/13	Eth1/14	Eth1/15
				Eth1/16	Eth1/17	Eth1/18
				Eth1/19	Eth1/20	Eth1/21
				Eth1/22	Eth1/23	Eth1/24
2	Static	R&D	Active
Console#

2-60