SMC Networks 10/100 manual Rate-limit, Syntax

RATE LIMIT COMMANDS

rate-limit

Use this command to set the rate limit. Use the no form to remove the rate limit.

Syntax

rate-limit {input output} percent percent no rate-limit input

•input - Sets the rate limit for inbound traffic.

•output - Sets the rate limit for outbound traffic

•percent - Sets the rate limit to predefined percentage of bandwidth:

Option	Percentage (based on port type)
	10 Mbps	100 Mbps	1000 Mbps
3	312K	3.12M	31.2M
6	625K	6.25M	62.5M
9	938K	9.38M	93.8M
12	1.25M	12.5M	125M
20	2M	20M	200M
40	4M	40M	400M
60	6M	60M	600M
80	8M	80M	800M

Default Setting

No limit

Command Mode

Interface Configuration (Ethernet, Port Channel)

3-105