SMC Networks 10/100 manual Reload, End

GENERAL COMMANDS

example, the !2 command repeats the second command in the Execution history buffer (config).

Console#!2

Console#config

Console(config)#

reload

Use this command to restart the system.

Note: When the system is restarted, it will always run the Power-On Self-Test. It will also retain all configuration information stored in non-volatile memory by the copy running-configstartup-configcommand.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

This command resets the entire system.

Example

This example shows how to reset the switch:

Console#reload

System will be restarted, continue <y/n>? y

end

Use this command to return to Privileged Exec mode.

Default Setting

None

3-17