SMC Networks 10/100 manual Authentication Commands

COMMAND LINE INTERFACE

Command Usage

See “Displaying Switch Hardware/Software Versions” on page -28 for detailed information on software items. The meaning of hardware items are as follows:

•Serial Number – Serial number of the main board.

•Hardware Version – Hardware version of the main board.

•Number of Ports – Number of ports on this switch

•Module Type – The module type installed in this switch

•Main Power Status – Power status for the switch.

Example

Console#show version
Unit1
Serial number	:12345
Hardware version	:012
Module A type	:not present
Module B type	:not present
Number of ports	:26
Main power status	:up
Agent(master)
Unit id	:1
Loader version	:0.0.0.2
Boot rom version	:0.0.0.6

Operation code version :1.0.0.5

Console#

Authentication Commands

You can configure this switch to authenticate users logging into the system for management access using local or RADIUS authentication methods.

Remote Authentication Dial-in User Service (RADIUS) is a logon authentication protocol that uses software running on a central server to control access to RADIUS-aware devices on the network. An authentication server contains a database of multiple user name/password pairs with associated privilege levels for each user that requires management access to a switch.

3-38