SMC Networks 10/100 manual Command Usage

CONFIGURING SNMP

Command Usage

•You can enable or disable authentication messages via the Web interface.

•You can enable or disable authentication messages or link-up-down messages via the CLI.

Command Attributes

•Trap Manager Capability – Indicates that the switch supports up to five trap managers.

•Trap Manager IP Address – Internet address of the host (the targeted recipient).

•Trap Manager Community String – Password-like community string sent with the notification operation. Though you can set this string in the Trap Managers table, we recommend that you define this string in the SNMP Protocol table as well. Range: 1-32 characters, case sensitive.

•Version – Indicates if the host is running SNMP version 1 or version 2c.

•Enable Authentication Traps – Issues a trap message whenever an invalid community string is submitted during the SNMP access authentication process.

•Enable Link-up and Link-down traps – Issues a trap message whenever a port link is established or broken.

2-85