Omnitron Systems Technology GX/TM user manual Detailed Module Configuration, Nmm

Page 26

4.0DETAILED MODULE CONFIGURATION

4.1OVERVIEW

PI

SA

The GX/TM has module parameters that require configuration depending on the application. The Module configuration screen is accessible by selecting the module slot number from the Chassis View screen. To access the Module configuration menu, select 1 at the Management Options screen, press <ENTER>. The Chassis Selection screen will be displayed. From the Chassis Selection screen, select the chassis number where the GX/TM module is installed.

NOTE: Module configuration is also available using NetOutlook.

PI

Chassis Selection

iConverter, Serial Agent

Number

Chassis Name

 

1NMM

2Not Available

3Not Available

4Not Available

5Not Available

6Not Available

7Not Available

8Not Available

9Not Available

10Not Available

11Not Available

12Not Available

13Not Available

14Not Available

15Not Available

16Not Available

17Not Available

18Not Available

19Not Available

Connected to Chassis Number 1

Chassis Number(1-19), Management Options(0), (H)elp, E(x)it > 1

By selecting Chassis Number 1, from the Chassis Selection screen, the Chassis View screen will be displayed.

Page 26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Standalone and PLUG-IN Module Table of Contents Overview Port Structure Installation Procedure Configuring DIP-SWITCHES 1.2 SW2 UTP Auto/Manual Negotiation AN/Man 1.3 SW3 UTP Speed Gigabit/10-100 1000/10-100 Board-Mounted Bank 2 Settings These DIP-switches are for factory use only Installing PLUG-IN Modules and Connecting Cables Passwords Management Options screen will be displayed GX/TM Setting IP Parameters as Dhcp Client Setting GX/TM Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Vlan ID Enabling/Disabling Soft-switch Reload Access the GX/TM Remotely Updating the GX/TM Firmware via the Serial Console Port Updating the GX/TM Firmware via FTP Verify Operation Detailed Module Configuration NMMGX/TM LED UTPUTP HDX UTP FDX Module Management Mode Port Configuration Port Access A167EC500000 3 802.3ah Parameters OUI 4 802.3ah Events Port Vlan Page Tagged Vlan Pvid Vlan Table is Empty Vlan ID VIDUTP BP a BP B Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter GX/TM Specifications Cable TypesTroubleshooting Guide Possible CausesUTP Issues Warranty Limitation of Warranty
Top Page Image Contents