Omnitron Systems Technology GX/TM user manual Management Options screen will be displayed

Page 13

The Management Options screen will be displayed.

PI

SA

Management Options

iConverter, Serial Agent

Network Management

1:Chassis and Module Management

2:Set Module Identifier

Management Module Preferences

3:IP and Control Preferences

4:SNMP Preferences

5:Abandon Preference Changes

6:Save Preference Changes

7:Restore to Factory Defaults

8:Restart Management Module

9:Other Networking Features

Management Module Maintenance

10:Firmware Update

11:Set Date/Time

IP Address

= 192.168.1.220

Chassis Number = 1

Enter Choice, (H)elp, E(x)it >

A new GX/TM module does not have a password, and will skip the Password Entry screen and go straight to the Management Options screen. If a password has been set, the Password Entry screen will be displayed. Type the password and press <ENTER>, the GX/TM will respond with the Management Options screen.

PI

SA

Omnitron Systems Technology, Inc.

iConverter, Serial Agent

Copyright 2001-2007 OST, Inc.

Password Entry

------------------------------------------------------------------------------

Omnitron Systems Technology

Technical Support:

(949)

250-6510

140 Technology #500

Sales/Products:

(800)

675-8410

Irvine, CA 92618

On the web at:

www.omnitron-systems.com

------------------------------------------------------------------------------

IP Address 192.168.1.220

MAC00:00:00:00:00:00

[xxxxxxxx]

Please enter the password >

Page 13

Image 13
Contents Standalone and PLUG-IN Module Table of Contents Overview Port Structure Installation Procedure Configuring DIP-SWITCHES 1.2 SW2 UTP Auto/Manual Negotiation AN/Man 1.3 SW3 UTP Speed Gigabit/10-100 1000/10-100 Board-Mounted Bank 2 Settings These DIP-switches are for factory use only Installing PLUG-IN Modules and Connecting Cables Passwords Management Options screen will be displayed GX/TM Setting IP Parameters as Dhcp Client Setting GX/TM Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Vlan ID Enabling/Disabling Soft-switch Reload Access the GX/TM Remotely Updating the GX/TM Firmware via the Serial Console Port Updating the GX/TM Firmware via FTP Verify Operation NMM Detailed Module ConfigurationGX/TM UTP HDX UTP FDX UTPLED Module Management Mode Port Configuration Port Access A167EC500000 3 802.3ah Parameters OUI 4 802.3ah Events Port Vlan Page Tagged Vlan Pvid UTP BP a BP B Vlan ID VIDVlan Table is Empty Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter Cable Types GX/TM SpecificationsPossible Causes Troubleshooting GuideUTP Issues Limitation of Warranty Warranty