Omnitron Systems Technology GX/TM user manual CNode Loopback

4.3.8cNode Loopback

The GX/TM has implemented Iometrix cNode Level 1 agent for testing performance metrics. The agent recognizes measurement packets and loops them back to the sending cNode device. Iometrix cNode equipment is required to obtain performance metrics.

cNode configuration is accessed by selecting option 10 from the Port configuration screen.

PI

SA

cNode Control -iConverter GX/TM		iConverter, Serial Agent
Identifier -
Chassis Number = 1	Slot Number = 3	Model Number = 8923-1

1:	cNode	Loopback	Disabled
2:	cNode	Rate Limit	64 Kbps

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

From the menu, loopback can be enabled or disabled and the rate limit can be selected.

4.3.9Port Statistics

The GX/TM module provides port statistics on both the fiber and UTP port.

The Port Statistics can be viewed by selecting option P from the Module configuration screen.

PI

Module - iConverter GX/TM				iConverter, Serial Agent
Identifier -
Chassis Number	=	1	Switch ON Condition		OFF Condition		H/W	Actual
Slot Number	=	2	1: Fiber Manual		Fiber AN		Off	Off
Model Number	=	8923-1	2: UTP Manual		UTP Auto-Neg		Off	Off
			3: UTP	10/100	UTP	1000	Off	Off
Serial Number	=	xxxxxxxx	4: UTP 10 Mbps		UTP 100 Mbps		Off	Off
Manufacturing Date =		xxxxxxxx	5: UTP HDX		UTP FDX		Off	Off
Hardware Revision	=	xx	6: Link Propagate		Link Segment		Off	Off
Software Revision	=	xx	7: Remote Fault		Normal		Off	Off
			8: Symm Fault Det		Normal		Off	Off
LED			9: BP A Enabled		BP A Disabled		Off	Off
1: Power	=	On	10: BP B Enabled		BP B Disabled		Off	Off
2: Power Supply 1	=	Off	11: Pause Enabled		Pause Disabled		Off	Off
3: Power Supply 2	=	On	12: Slave Only		Master/Slave		Off	Off
4: Power Supply 3	=	Off	13: UTP	Manual-X	UTP	Auto-X	Off	Off
5: Fiber Link	=	Off	14: UTP Crossover		UTP Through		Off	Off
6: BP Master	=	Off	15: Not Available
7: UTP 100+10 Link =		Off	16: Not Available
8: UTP 1000+10 Link=		Off	OAM settings:
9: UTP FDX	=	Off	17: IP Protocol State			Off
			18: Management Mode			ah OAM
Toggle Switch(1-16), (I)dentifier, (R)eset, (H)elp, (P)ortStat, Port(C)tl > P

Page 43