Omega Speaker Systems RD8300 manual Input Board, Fig B-4 Digital IO Module Jumpers 2 Channel shown

Page 112

Appendix B – Digital Input Voltage Adjustment

B.2 DIGITAL IO MODULE:

The digital IO module accepts 2 to 6 digital inputs depending on options. By default these inputs are set up to accept input voltages from 12 to 24 volts dc. The user can change the input voltage range to 5 to 12 volts dc by moving jumpers internally on the module. This involves removing the digital IO module from the recorder.

To do this, remove the screws marked B in Figure B-1 and gently pull the module from the enclosure. Note that the rear panel is loose and not connected to the circuit board.

Once the module is removed, identify the jumpers as shown in Fig B-4. Note that there could be up to 6 jumpers present. The jumper locations are as follows:

2 Input Board:

P2 – Input 1; P3 – Input 2

Jumpers correspond to inputs from right to left when looking at the terminal block side of the board.

Jumpers are shown in position 1-2.

The links are as follow:

Position 2–3 12 to 24Vdc Input

Position 1–2 5 to 12Vdc Input

Set the jumpers as required and reinstall the board into the recorder chassis. Take care to align the connector with the socket before applying pressure to the board.

Replace the panel and the screws.

Fig B-4 Digital IO Module Jumpers (2 Channel shown)

Page 103

09/11/2008 REV 0.99

Page 111 Page 113
Image 112
Page 111 Page 113
Contents User’s Guide Servicing North America Table of Contents Wiring Specifications and Procedures Environment and Location InstallationDisplay Elements Timer/Totalizer Reset Special Events Turning the unit off Annotating TrendsBrowsing Historic Data Browsing AnnotationsAlarms Record SetupSystem Administrative Menu Digital Input/OutputTouch Screen Cleaning Instructions Calibration World Wide Web Web Based FTP Manager Ethernet ProtocolsUSB Connections Utility Programs 102Symbols Trademarks09/11/2008 REV Overview General DescriptionSystem Overview System Overview09/11/2008 REV Recorder Front Display AreaStatus Indicator Media DoorIR Comm Port StylusRecorder Rear Panel Power SupplyAnalog Inputs Input/Output Module Computer InterfaceConfiguration Files FilesExhibitor Software Data FilesActivity Files Miscellaneous FilesQuick Start Guide Keyboarding HelpActivity Lights SecurityRemote Access Passwords User LevelsEquipment Handling Environment and LocationInstallation Recorder Dimensions in Inches mmPanel Mounting Front Panel Cut OutPanel Front Gasket Rear View Panel InsertionPower Requirements Wiring Specifications and ProceduresPower Connections Signal Input Wiring Rear PanelResistance Temperature Detector RTD Inputs Analog InputsThermocouple Inputs Linear InputsPotential Free Contacts FrequencyEthernet Relay Output, Contact InputAudio Connection USB ConnectionMouse and Keyboard Connection Isolated Serial Interface Option 24Vdc Isolated Output Option18 RS485 Adapter 19 RS485 120 Ohm Jumper Live Display Area Display ElementsTask Bar Utility Setup Menu Utility Setup Menu09/11/2008 REV Record Session Alarm, Event and Activity LogsFolder Mydata Data File Mydata.dat Bitmap Files Text Files Configuration Manager Load ConfigurationSending Email E-mail WindowDisplay Utilities User LoginDisplay Brightness Timer/Totalizer Reset Record on AlarmSpecial Events Background ColorEmail on Alarm Event Record Setup Digital Input Setup Record ModeSystem Setup Alarm Master SetupAnnotating Trends Drawing on the ScreenBrowsing Historic Data Adding a Text MessageZoom and Compress Data 13.4 Zoom with point markersUsing the Cursor 13.8 Cursor ModeView Memos and Bitmaps 13.6 Memo View 13.7 Bitmap ViewUsing Browser Jump To Browsing AnnotationsSetup display as shown right Master Channel SetupInput Channels Channel Setup Channel SetupLinear Input Channel Type SetupResistance Input Industrial Square Root Extraction Thermocouples and RTDsCalculated Channel Setup Calculated Input09/11/2008 REV Gated Timer Conditional InputReset Point TotalizerFrequency/Pulse Count Frequency13 Pulse Count Setup Pulse CountRecorder Setup Display Builder Building the DisplayEditing 3 Display BuilderRotate List Digital Display Setup WidgetsDigital Displays Will show OFFDisplaying Min, Max or Average Values Bar Graph Setup Bar GraphsChannel Type Shows the current widget style for Channel. For information only09/11/2008 REV 09/11/2008 REV Trend Setup Trend Setup Window09/11/2008 REV Alarms RateAlarm Master Setup 1 Alarm Master SetupAlarm Setup Digital Input/Output Digital Output Setup 1 Digital Output SetupDigital Input Setup 09/11/2008 REV Record Setup Select ChannelsMedia and Filename Record RateWhat to Record Point type Max Min AverageSplit Files Timed RecordTriggered Record Media Alarm System Administrative Menu System Admin Menu09/11/2008 REV System Setup Temperature CompensationNTP Time Server Modbus Settings Mouse Pointer EnableConfig Auto Save Menu TimeoutUser Setup Password Management UserFile Explorer Network Settings 7 Web User AdminWeb User Manager 6 Network IP AddressSet ActiveSync Password Smtp Email Settings9 USB ActiveSync Password Registry Languages System ReFlash09/11/2008 REV Communication World Wide Web3 View Recorder Web Based FTP Manager 2 FTP File Manager Communication Ethernet Protocols OPC ServerModbus Status Registers Modbus ServerModbus Data Registers Register # USB Connections Utility Programs FTP Manager09/11/2008 REV 09/11/2008 REV Remote Display Remote Control3 Remote Recorder 4 Remote Manager Remote Manager5 Remote Manager Connected Touch Screen Cleaning InstructionsCalibration Calibrating Linear Voltage Inputs Set ChannelZero Cal Full CalCalibrating the RTD Current Source Store CalCalibrating Frequency Go to Table of Contents Resolution Color Virtual Chart SpeedPower Requirements Power Fail ProtectionType Range C Accuracy C Range F Accuracy F Safety DimensionsWeight Recording RatesAppendix B Digital Input Voltage Adjustment Input Board Fig B-4 Digital IO Module Jumpers 2 Channel shownWARRANTY/DISCLAIMER Temperature

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.
Top Page Image Contents