Omega Speaker Systems RD8300 Input Channels, Master Channel Setup, Setup display as shown right

Page 47

Section 5 – Recorder Setup

5.0 RECORDER SETUP

The recorder can be fully customized and needs to be set up by the user. The setup is saved in configuration files, which can be saved and loaded by the user. Several configurations are shipped with the unit and can be used as a starting point or the user can start with a clean slate and create a unique configuration.

5.1Input Channels

The recorder has 18 channels that need to be configured and set up. The setup for the channels requires defining the inputs. Channels 1 to 12 (channels 7 to 12 are optional) can be live inputs – analog or digital. Channels 13 to 18 or any other channel not assigned to a live input can be a virtual channel. Unused channels should be set as unassigned. The channels can be:

Analog: Linear – Voltage or Currents, Resistance, Thermocouples, RTD‟s

Square Root Extraction - Voltage or Currents

Digital: Logic input (Dry Contacts).

Frequency Input. Channels 1,6,( optionally 7,12) can accept frequency inputs (Frequency, Period, Count, Pulse Width, Duty Cycle)

Virtual: All channels not assigned above can be Computational, Conditional, Gated Timers or Totalizer channels. Although not directly linked to live inputs, these channels can be indirectly associated with live inputs through the computational and conditional options.

5.1.1 Master Channel Setup

The Master Channel Setup window is a one stop shop to quickly set up all the channels or get a general overview of channel setup. If passwords are enabled the user has to log in as Administrator in order to access. NOTE: You cannot use this option if the unit is in the record mode – you need to stop the recording first (See Section Record Setup).

To access the Master Channel Setup window:

Press the Utility Setup Menu icon on the bottom left of the Task Bar.

Then press the Master Channel Setup icon.

NOTE: It takes the recorder a while to build the

Figure 5-1 Master Channel Setup

 

setup display as shown right.

 

The Master Channel Setup dialog window shows the current setup of all the channels and allows the user to edit each of them individually. The checkboxes show whether the channel and its alarms are enabled.

You can see the current settings for Input Type, Range and Engineering Units. For example in Figure 5-1, Channel 2 is set up as a Gated Timer with engineering units of Seconds. The channel is enabled and the alarms are disabled.

Tap the double arrow button to view the other 12 channels. In order to change the setups it is necessary to use the edit button. Pressing the edit button takes you to the individual channel

setup menu. When you have completed the channel setups press the done button to return.

Page 38

09/11/2008 REV 0.99

Page 46 Page 48
Image 47
Page 46 Page 48
Contents User’s Guide Servicing North America Table of Contents Display Elements Environment and Location InstallationWiring Specifications and Procedures Browsing Annotations Timer/Totalizer Reset Special EventsTurning the unit off Annotating Trends Browsing Historic DataDigital Input/Output AlarmsRecord Setup System Administrative Menu102 Touch Screen Cleaning Instructions CalibrationWorld Wide Web Web Based FTP Manager Ethernet Protocols USB Connections Utility ProgramsTrademarks Symbols09/11/2008 REV General Description OverviewSystem Overview System Overview09/11/2008 REV Display Area Recorder FrontStylus Status IndicatorMedia Door IR Comm PortAnalog Inputs Power SupplyRecorder Rear Panel Computer Interface Input/Output ModuleFiles Configuration FilesMiscellaneous Files Exhibitor SoftwareData Files Activity FilesQuick Start Guide Security KeyboardingHelp Activity LightsUser Levels Remote Access PasswordsEnvironment and Location Equipment HandlingRecorder Dimensions in Inches mm InstallationFront Panel Cut Out Panel MountingRear View Panel Insertion Panel Front GasketPower Connections Wiring Specifications and ProceduresPower Requirements Rear Panel Signal Input WiringLinear Inputs Resistance Temperature Detector RTD InputsAnalog Inputs Thermocouple InputsFrequency Potential Free ContactsRelay Output, Contact Input EthernetMouse and Keyboard Connection USB ConnectionAudio Connection 18 RS485 Adapter 19 RS485 120 Ohm Jumper 24Vdc Isolated Output OptionIsolated Serial Interface Option Task Bar Display ElementsLive Display Area Utility Setup Menu Utility Setup Menu09/11/2008 REV Folder Mydata Data File Mydata.dat Bitmap Files Text Files Alarm, Event and Activity LogsRecord Session Load Configuration Configuration ManagerE-mail Window Sending EmailDisplay Brightness User LoginDisplay Utilities Background Color Timer/Totalizer ResetRecord on Alarm Special EventsAlarm Master Setup Email on Alarm EventRecord Setup Digital Input Setup Record Mode System SetupDrawing on the Screen Annotating TrendsAdding a Text Message Browsing Historic Data13.4 Zoom with point markers Zoom and Compress Data13.6 Memo View 13.7 Bitmap View Using the Cursor13.8 Cursor Mode View Memos and BitmapsBrowsing Annotations Using Browser Jump ToInput Channels Master Channel SetupSetup display as shown right Channel Setup Channel SetupResistance Input Channel Type SetupLinear Input Thermocouples and RTDs Industrial Square Root ExtractionCalculated Input Calculated Channel Setup09/11/2008 REV Conditional Input Gated TimerTotalizer Reset PointFrequency Frequency/Pulse CountPulse Count 13 Pulse Count SetupRecorder Setup Building the Display Display Builder3 Display Builder EditingRotate List Will show OFF Digital Display SetupWidgets Digital DisplaysDisplaying Min, Max or Average Values Channel. For information only Bar Graph SetupBar Graphs Channel Type Shows the current widget style for09/11/2008 REV 09/11/2008 REV Trend Setup Window Trend Setup09/11/2008 REV Rate Alarms1 Alarm Master Setup Alarm Master SetupAlarm Setup Digital Input/Output 1 Digital Output Setup Digital Output SetupDigital Input Setup 09/11/2008 REV Select Channels Record SetupPoint type Max Min Average Media and FilenameRecord Rate What to RecordTriggered Record Timed RecordSplit Files Media Alarm System Admin Menu System Administrative Menu09/11/2008 REV NTP Time Server Temperature CompensationSystem Setup Menu Timeout Modbus SettingsMouse Pointer Enable Config Auto SaveUser User Setup Password ManagementFile Explorer 6 Network IP Address Network Settings7 Web User Admin Web User Manager9 USB ActiveSync Password Smtp Email SettingsSet ActiveSync Password Registry System ReFlash Languages09/11/2008 REV World Wide Web Communication3 View Recorder Web Based FTP Manager 2 FTP File Manager Communication OPC Server Ethernet ProtocolsModbus Data Registers Modbus ServerModbus Status Registers Register # USB Connections FTP Manager Utility Programs09/11/2008 REV 09/11/2008 REV 3 Remote Recorder Remote ControlRemote Display 5 Remote Manager Connected Remote Manager4 Remote Manager Calibration Cleaning InstructionsTouch Screen Full Cal Calibrating Linear Voltage InputsSet Channel Zero CalCalibrating Frequency Store CalCalibrating the RTD Current Source Go to Table of Contents Power Fail Protection Resolution ColorVirtual Chart Speed Power RequirementsType Range C Accuracy C Range F Accuracy F Recording Rates SafetyDimensions WeightAppendix B Digital Input Voltage Adjustment Fig B-4 Digital IO Module Jumpers 2 Channel shown Input BoardWARRANTY/DISCLAIMER Temperature

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.
Top Page Image Contents