Omega Speaker Systems RD8300 manual Digital Output Setup

Page 72

Section 5 – Recorder Setup

5.5.1 Digital Output Setup

To access the Digital Output Setup dialog window:

Press the Utility Setup Menu icon on the bottom left of the Task Bar. Then Press the Digital I/O Setup icon which will bring up the digital IO selection dialog shown left.

The Top Button will take you to the Digital Input setup; the lower button will take you to the Digital Output setup.

Select the Digital Output setup button to launch the Digital Output Setup dialog window as shown in Figure 5-5-1. This dialog window provides complete control over the setup of the digital relay outputs. No assumption is made about the type of relay output or its capabilities; these must be checked by the user from the hardware specifications of the card installed in the recorder.

There can be a maximum of 12 output relays. The scroll bar can be used to view contacts 7 to 12.

Enable: This checkbox is used to enable individual output relays. If it is checked, the output is active, if it is not, the output is disabled. Note that the Master Enable checkbox MUST be checked to allow any output to function. If a Digital IO card is not present in the recorder or there are less than 12 relays on it, you will not be able to check the enable box of relays not present in the system.

Manual: These buttons enable the user to override the current status of the relay outputs in real time.

Set – activates the relay

Reset - deactivates the relay.

Figure 5-5-1 Digital Output Setup

The icon on the button changes to indicate the current status of the output relay. The Master Enable must be checked in order for this to operate on the outputs.

Relay Type: This drop down selection box allows the user to define the relay type as Normal, Latching or Reflash. The descriptions are detailed above.

Fail Safe: Check this box if you want this output relay to be fail safe. This reverses the logic so a contact which is normally OPEN will be energized normally CLOSED. Full details are shown above.

Open on Reset: Check this option if you want the Alarm Reset button to reset the contacts irrespective. Under normal circumstances a contact will not drop out until the alarm condition clears. If the Open on Reset box is checked, the contact will drop out when the Alarm Reset button is pressed irrespective of the alarm condition. This may be useful if the contact is used as an alarm klaxon.

Master Enable: This checkbox must be checked for the output relays to function. If it is not checked, none of the relays will operate.

Page 63

09/11/2008 REV 0.99

Page 71 Page 73
Image 72
Page 71 Page 73
Contents User’s Guide Servicing North America Table of Contents Environment and Location Installation Wiring Specifications and ProceduresDisplay Elements Timer/Totalizer Reset Special Events Turning the unit off Annotating TrendsBrowsing Historic Data Browsing AnnotationsAlarms Record SetupSystem Administrative Menu Digital Input/OutputTouch Screen Cleaning Instructions Calibration World Wide Web Web Based FTP Manager Ethernet ProtocolsUSB Connections Utility Programs 102Symbols Trademarks09/11/2008 REV Overview General DescriptionSystem Overview System Overview09/11/2008 REV Recorder Front Display AreaStatus Indicator Media DoorIR Comm Port StylusPower Supply Recorder Rear PanelAnalog Inputs Input/Output Module Computer InterfaceConfiguration Files FilesExhibitor Software Data FilesActivity Files Miscellaneous FilesQuick Start Guide Keyboarding HelpActivity Lights SecurityRemote Access Passwords User LevelsEquipment Handling Environment and LocationInstallation Recorder Dimensions in Inches mmPanel Mounting Front Panel Cut OutPanel Front Gasket Rear View Panel InsertionWiring Specifications and Procedures Power RequirementsPower Connections Signal Input Wiring Rear PanelResistance Temperature Detector RTD Inputs Analog InputsThermocouple Inputs Linear InputsPotential Free Contacts FrequencyEthernet Relay Output, Contact InputUSB Connection Audio ConnectionMouse and Keyboard Connection 24Vdc Isolated Output Option Isolated Serial Interface Option18 RS485 Adapter 19 RS485 120 Ohm Jumper Display Elements Live Display AreaTask Bar Utility Setup Menu Utility Setup Menu09/11/2008 REV Alarm, Event and Activity Logs Record SessionFolder Mydata Data File Mydata.dat Bitmap Files Text Files Configuration Manager Load ConfigurationSending Email E-mail WindowUser Login Display UtilitiesDisplay Brightness Timer/Totalizer Reset Record on AlarmSpecial Events Background ColorEmail on Alarm Event Record Setup Digital Input Setup Record ModeSystem Setup Alarm Master SetupAnnotating Trends Drawing on the ScreenBrowsing Historic Data Adding a Text MessageZoom and Compress Data 13.4 Zoom with point markersUsing the Cursor 13.8 Cursor ModeView Memos and Bitmaps 13.6 Memo View 13.7 Bitmap ViewUsing Browser Jump To Browsing AnnotationsMaster Channel Setup Setup display as shown rightInput Channels Channel Setup Channel SetupChannel Type Setup Linear InputResistance Input Industrial Square Root Extraction Thermocouples and RTDsCalculated Channel Setup Calculated Input09/11/2008 REV Gated Timer Conditional InputReset Point TotalizerFrequency/Pulse Count Frequency13 Pulse Count Setup Pulse CountRecorder Setup Display Builder Building the DisplayEditing 3 Display BuilderRotate List Digital Display Setup WidgetsDigital Displays Will show OFFDisplaying Min, Max or Average Values Bar Graph Setup Bar GraphsChannel Type Shows the current widget style for Channel. For information only09/11/2008 REV 09/11/2008 REV Trend Setup Trend Setup Window09/11/2008 REV Alarms RateAlarm Master Setup 1 Alarm Master SetupAlarm Setup Digital Input/Output Digital Output Setup 1 Digital Output SetupDigital Input Setup 09/11/2008 REV Record Setup Select ChannelsMedia and Filename Record RateWhat to Record Point type Max Min AverageTimed Record Split FilesTriggered Record Media Alarm System Administrative Menu System Admin Menu09/11/2008 REV Temperature Compensation System SetupNTP Time Server Modbus Settings Mouse Pointer EnableConfig Auto Save Menu TimeoutUser Setup Password Management UserFile Explorer Network Settings 7 Web User AdminWeb User Manager 6 Network IP AddressSmtp Email Settings Set ActiveSync Password9 USB ActiveSync Password Registry Languages System ReFlash09/11/2008 REV Communication World Wide Web3 View Recorder Web Based FTP Manager 2 FTP File Manager Communication Ethernet Protocols OPC ServerModbus Server Modbus Status RegistersModbus Data Registers Register # USB Connections Utility Programs FTP Manager09/11/2008 REV 09/11/2008 REV Remote Control Remote Display3 Remote Recorder Remote Manager 4 Remote Manager5 Remote Manager Connected Cleaning Instructions Touch ScreenCalibration Calibrating Linear Voltage Inputs Set ChannelZero Cal Full CalStore Cal Calibrating the RTD Current SourceCalibrating Frequency Go to Table of Contents Resolution Color Virtual Chart SpeedPower Requirements Power Fail ProtectionType Range C Accuracy C Range F Accuracy F Safety DimensionsWeight Recording RatesAppendix B Digital Input Voltage Adjustment Input Board Fig B-4 Digital IO Module Jumpers 2 Channel shownWARRANTY/DISCLAIMER Temperature

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.
Top Page Image Contents