Omega Speaker Systems RD8300 manual Equipment Handling, Environment and Location

Page 22

Section 3 – Installation

3.0 INSTALLATION

This section provides information and procedures on installing and wiring the recorder. Included are handling procedures, installation and wiring specifications, and instructions for both standard and optional equipment.

3.1Equipment Handling

3.1.1Initial Inspection

Exercise care when unpacking the instrument from the shipping carton. The instrument is packed in a shockproof foam retainer to prevent damage during normal transit. If damage to the shipping carton is evident, ask the carrier‟s representative to be present when the instrument is unpacked.

3.1.2 Unpacking Procedure

To unpack your recorder, first remove the foam retainer and instrument from the shipping carton. Then, carefully remove the instrument from the foam retainer.

3.1.3 Detected Damage

If damage is detected after unpacking the instrument, re-pack the instrument and return it to the factory as described in the following section.

3.1.4 Equipment Return

Before returning a damaged or malfunctioning instrument to the factory for repairs, contact the sales organization from which you purchased the instrument. A Return Merchandise Authorization number must be obtained from the factory before returning an instrument for any reason.

3.1.5 Storage

For prolonged storage before installation, re-pack the recorder in the shipping container. Cushion the recorder with foam molding or an equivalent and store in a cool, dry area. It is not recommended to store the recorder for more than one year. If longer storage time is required, contact the factory for additional storage information.

3.2Environment and Location

The instrument is intended to operate in the following environment:

Indoor Use Only

Installation Category II

per IEC 664

Pollution Degree Level II

per UL3111-1 / IEC61010-1

Altitude

up to 2,000 m

Temperature

-10 °C to +50 °C operating per UL3111-1 / IEC61010-1

Humidity

Maximum relative humidity 80% for temperatures up to

 

31°C decreasing linearly to 50% relative humidity at 40°C

AC Mains Supply

100 - 240 Vac ~ 50/60 Hz 35 Vac ±10%

Page 13

09/11/2008 REV 0.99

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User’s Guide Servicing North America Table of Contents Wiring Specifications and Procedures Environment and Location InstallationDisplay Elements Browsing Historic Data Timer/Totalizer Reset Special EventsTurning the unit off Annotating Trends Browsing AnnotationsSystem Administrative Menu AlarmsRecord Setup Digital Input/OutputUSB Connections Utility Programs Touch Screen Cleaning Instructions CalibrationWorld Wide Web Web Based FTP Manager Ethernet Protocols 102Symbols Trademarks09/11/2008 REV Overview General DescriptionSystem Overview System Overview09/11/2008 REV Recorder Front Display AreaIR Comm Port Status IndicatorMedia Door StylusRecorder Rear Panel Power SupplyAnalog Inputs Input/Output Module Computer InterfaceConfiguration Files FilesActivity Files Exhibitor SoftwareData Files Miscellaneous FilesQuick Start Guide Activity Lights KeyboardingHelp SecurityRemote Access Passwords User LevelsEquipment Handling Environment and LocationInstallation Recorder Dimensions in Inches mmPanel Mounting Front Panel Cut OutPanel Front Gasket Rear View Panel InsertionPower Requirements Wiring Specifications and ProceduresPower Connections Signal Input Wiring Rear PanelThermocouple Inputs Resistance Temperature Detector RTD InputsAnalog Inputs Linear InputsPotential Free Contacts FrequencyEthernet Relay Output, Contact InputAudio Connection USB ConnectionMouse and Keyboard Connection Isolated Serial Interface Option 24Vdc Isolated Output Option18 RS485 Adapter 19 RS485 120 Ohm Jumper Live Display Area Display ElementsTask Bar Utility Setup Menu Utility Setup Menu09/11/2008 REV Record Session Alarm, Event and Activity LogsFolder Mydata Data File Mydata.dat Bitmap Files Text Files Configuration Manager Load ConfigurationSending Email E-mail WindowDisplay Utilities User LoginDisplay Brightness Special Events Timer/Totalizer ResetRecord on Alarm Background ColorSystem Setup Email on Alarm EventRecord Setup Digital Input Setup Record Mode Alarm Master SetupAnnotating Trends Drawing on the ScreenBrowsing Historic Data Adding a Text MessageZoom and Compress Data 13.4 Zoom with point markersView Memos and Bitmaps Using the Cursor13.8 Cursor Mode 13.6 Memo View 13.7 Bitmap ViewUsing Browser Jump To Browsing AnnotationsSetup display as shown right Master Channel SetupInput Channels Channel Setup Channel SetupLinear Input Channel Type SetupResistance Input Industrial Square Root Extraction Thermocouples and RTDsCalculated Channel Setup Calculated Input09/11/2008 REV Gated Timer Conditional InputReset Point TotalizerFrequency/Pulse Count Frequency13 Pulse Count Setup Pulse CountRecorder Setup Display Builder Building the DisplayEditing 3 Display BuilderRotate List Digital Displays Digital Display SetupWidgets Will show OFFDisplaying Min, Max or Average Values Channel Type Shows the current widget style for Bar Graph SetupBar Graphs Channel. For information only09/11/2008 REV 09/11/2008 REV Trend Setup Trend Setup Window09/11/2008 REV Alarms RateAlarm Master Setup 1 Alarm Master SetupAlarm Setup Digital Input/Output Digital Output Setup 1 Digital Output SetupDigital Input Setup 09/11/2008 REV Record Setup Select ChannelsWhat to Record Media and FilenameRecord Rate Point type Max Min AverageSplit Files Timed RecordTriggered Record Media Alarm System Administrative Menu System Admin Menu09/11/2008 REV System Setup Temperature CompensationNTP Time Server Config Auto Save Modbus SettingsMouse Pointer Enable Menu TimeoutUser Setup Password Management UserFile Explorer Web User Manager Network Settings7 Web User Admin 6 Network IP AddressSet ActiveSync Password Smtp Email Settings9 USB ActiveSync Password Registry Languages System ReFlash09/11/2008 REV Communication World Wide Web3 View Recorder Web Based FTP Manager 2 FTP File Manager Communication Ethernet Protocols OPC ServerModbus Status Registers Modbus ServerModbus Data Registers Register # USB Connections Utility Programs FTP Manager09/11/2008 REV 09/11/2008 REV Remote Display Remote Control3 Remote Recorder 4 Remote Manager Remote Manager5 Remote Manager Connected Touch Screen Cleaning InstructionsCalibration Zero Cal Calibrating Linear Voltage InputsSet Channel Full CalCalibrating the RTD Current Source Store CalCalibrating Frequency Go to Table of Contents Power Requirements Resolution ColorVirtual Chart Speed Power Fail ProtectionType Range C Accuracy C Range F Accuracy F Weight SafetyDimensions Recording RatesAppendix B Digital Input Voltage Adjustment Input Board Fig B-4 Digital IO Module Jumpers 2 Channel shownWARRANTY/DISCLAIMER Temperature

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.
Top Page Image Contents