Omega Speaker Systems RD8300 manual Editing, Display Builder

Page 59

Section 5 – Recorder Setup

Widgets are selected as follows:

Place Digital display either full size (2x2) or half size (2x1).

Place Bar Graphs - horizontal full (6x1) or half (3x1) or vertical full (1x8) or half (1x4).

Place Trends - horizontal full (6x8), two-thirds (4x8) or half (3x8) and vertical full (6x8) or half (6x4).

Place graphics or set background colors

When placing a widget the system will attempt to put it at the block you tap if space is available. It will move it to fit, otherwise you will get an error tone and nothing will be placed.

As widgets are placed on the palette they need to be defined. They have to be associated with a channel, have colors defined, and have scales set where necessary. This can be done as the widget is placed or can be edited using the Edit buttons. For details on configuring the widgets see the setup information for Digital Display, Bar Charts or Trends below.

Widgets already placed can be moved or deleted. The display can be named or renamed and saved and the whole process can be aborted by pressing the Cancel button.

5.2.2 Editing

Once widgets are placed the following buttons can be used to edit the display:

Delete: Will delete a widget. Press the

Delete button then tap the widget you want

to delete.

 

Edit: Allows a widget to be edited. Press the

 

Edit button then tap the widget you want to

 

edit. The widget edit window will pop up – see below.

 

Move: Allows a widget to be moved. Press

 

the Move button then tap the widget. It will

 

be “lifted” off the palette. Tap the new location you want

 

to move the widget to.

 

Clear All: Will completely clear the palette

 

of all widgets.

 

Save: Saves the display with the name

 

entered into the save dialog box.

 

Alternatively, select an existing display name and

Figure 5-2-3 Display Builder

overwrite it.

Load: Loads an existing display which can be modified. Use the dialog box to select existing displays.

Cancel: Discard all settings and exit.

Exit: Exit with settings intact.

Page 50

09/11/2008 REV 0.99

Page 58 Page 60
Image 59
Page 58 Page 60
Contents User’s Guide Servicing North America Table of Contents Display Elements Environment and Location InstallationWiring Specifications and Procedures Browsing Annotations Timer/Totalizer Reset Special EventsTurning the unit off Annotating Trends Browsing Historic DataDigital Input/Output AlarmsRecord Setup System Administrative Menu102 Touch Screen Cleaning Instructions CalibrationWorld Wide Web Web Based FTP Manager Ethernet Protocols USB Connections Utility ProgramsTrademarks Symbols09/11/2008 REV General Description OverviewSystem Overview System Overview09/11/2008 REV Display Area Recorder FrontStylus Status IndicatorMedia Door IR Comm PortAnalog Inputs Power SupplyRecorder Rear Panel Computer Interface Input/Output ModuleFiles Configuration FilesMiscellaneous Files Exhibitor SoftwareData Files Activity FilesQuick Start Guide Security KeyboardingHelp Activity LightsUser Levels Remote Access PasswordsEnvironment and Location Equipment HandlingRecorder Dimensions in Inches mm InstallationFront Panel Cut Out Panel MountingRear View Panel Insertion Panel Front GasketPower Connections Wiring Specifications and ProceduresPower Requirements Rear Panel Signal Input WiringLinear Inputs Resistance Temperature Detector RTD InputsAnalog Inputs Thermocouple InputsFrequency Potential Free ContactsRelay Output, Contact Input EthernetMouse and Keyboard Connection USB ConnectionAudio Connection 18 RS485 Adapter 19 RS485 120 Ohm Jumper 24Vdc Isolated Output OptionIsolated Serial Interface Option Task Bar Display ElementsLive Display Area Utility Setup Menu Utility Setup Menu09/11/2008 REV Folder Mydata Data File Mydata.dat Bitmap Files Text Files Alarm, Event and Activity LogsRecord Session Load Configuration Configuration ManagerE-mail Window Sending EmailDisplay Brightness User LoginDisplay Utilities Background Color Timer/Totalizer ResetRecord on Alarm Special EventsAlarm Master Setup Email on Alarm EventRecord Setup Digital Input Setup Record Mode System SetupDrawing on the Screen Annotating TrendsAdding a Text Message Browsing Historic Data13.4 Zoom with point markers Zoom and Compress Data13.6 Memo View 13.7 Bitmap View Using the Cursor13.8 Cursor Mode View Memos and BitmapsBrowsing Annotations Using Browser Jump ToInput Channels Master Channel SetupSetup display as shown right Channel Setup Channel SetupResistance Input Channel Type SetupLinear Input Thermocouples and RTDs Industrial Square Root ExtractionCalculated Input Calculated Channel Setup09/11/2008 REV Conditional Input Gated TimerTotalizer Reset PointFrequency Frequency/Pulse CountPulse Count 13 Pulse Count SetupRecorder Setup Building the Display Display Builder3 Display Builder EditingRotate List Will show OFF Digital Display SetupWidgets Digital DisplaysDisplaying Min, Max or Average Values Channel. For information only Bar Graph SetupBar Graphs Channel Type Shows the current widget style for09/11/2008 REV 09/11/2008 REV Trend Setup Window Trend Setup09/11/2008 REV Rate Alarms1 Alarm Master Setup Alarm Master SetupAlarm Setup Digital Input/Output 1 Digital Output Setup Digital Output SetupDigital Input Setup 09/11/2008 REV Select Channels Record SetupPoint type Max Min Average Media and FilenameRecord Rate What to RecordTriggered Record Timed RecordSplit Files Media Alarm System Admin Menu System Administrative Menu09/11/2008 REV NTP Time Server Temperature CompensationSystem Setup Menu Timeout Modbus SettingsMouse Pointer Enable Config Auto SaveUser User Setup Password ManagementFile Explorer 6 Network IP Address Network Settings7 Web User Admin Web User Manager9 USB ActiveSync Password Smtp Email SettingsSet ActiveSync Password Registry System ReFlash Languages09/11/2008 REV World Wide Web Communication3 View Recorder Web Based FTP Manager 2 FTP File Manager Communication OPC Server Ethernet ProtocolsModbus Data Registers Modbus ServerModbus Status Registers Register # USB Connections FTP Manager Utility Programs09/11/2008 REV 09/11/2008 REV 3 Remote Recorder Remote ControlRemote Display 5 Remote Manager Connected Remote Manager4 Remote Manager Calibration Cleaning InstructionsTouch Screen Full Cal Calibrating Linear Voltage InputsSet Channel Zero CalCalibrating Frequency Store CalCalibrating the RTD Current Source Go to Table of Contents Power Fail Protection Resolution ColorVirtual Chart Speed Power RequirementsType Range C Accuracy C Range F Accuracy F Recording Rates SafetyDimensions WeightAppendix B Digital Input Voltage Adjustment Fig B-4 Digital IO Module Jumpers 2 Channel shown Input BoardWARRANTY/DISCLAIMER Temperature

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.
Top Page Image Contents