Omega Speaker Systems RD8300 View Memos and Bitmaps, Using the Cursor, Memo View 13.7 Bitmap View

Section 4 – Functional Description

4.13.2 View Memos and Bitmaps

At any time in the browse window, when an embedded memo or bitmap flag is visible, the respective memo or bitmap can be viewed by tapping the envelope icon ONCE. Note that double tapping the screen will go to the Annotate dialog window.

The text memos will show in a pop up window on the trend browse screen as shown in Figure 4-13.6 below. The bitmaps will show in a new window, provided the bitmap is available – see Figure 4-13.7. If you removed, renamed or deleted the .bmp file, you will get an error message. When you are done viewing the memo, tap the “OK” button. On the bitmap tap the check mark (Done) button. If the memo or bitmap was attached while recording a file, these items will be available for review on the PC software.

Fig 4-13.6 Memo View Fig 4-13.7 Bitmap View

4.13.3 Using the Cursor

Available only in the “Browse” mode. Pressing the cursor button will bring up a cursor on the browse screen. A window will pop up on the right hand side of the screen showing the time and active

channel values directly under the cursor.

The upper slider bar scrolls through the data buffer.

The lower slider bar moves the cursor.

Fig 4-13.8 Cursor Mode

Page 36

09/11/2008 REV 0.99