Omega Speaker Systems RD8300 USB Connection, Audio Connection, Mouse and Keyboard Connection

Page 31

Section 3 – Installation

3.6USB Connection

There are two USB (Universal Serial Bus) Connectors on the rear panel. One is a Type A Master connector; the other is a Type B Slave connector. Only one can be active at any time – the active connector is selected by a slide switch on the under side of the recorder close to the back panel. The switch is set below the surface. Slide the switch toward the connector you want active – A or B BEFORE powering up the unit. Use standard shielded USB connector cables to connect to your USB device (Host PC to USB B – Slave Device to USB A Host port).

Note: Maximum cable length should not exceed 5m (15 feet).

Figure 3-13

3.7Audio Connection

The audio output connector is a 6 pin mini din socket that permits connection to the recorders audio lines. Connections are as follows:

Pin

Direction

Description

1

Out

Audio Common

2

In

Microphone Input

3

Out

Line Output – Left

5

Out

Line Output – Right

4

In

Line Input - Left

6

In

Line Input - Right

Figure 3-14

An adapter is available that converts the Mini Din to 3 Standard Phone Jacks for Microphone In, Line In and Line Out.

3.8Mouse and Keyboard Connection

The keyboard / mouse connector is a 6 pin mini din socket that permits connection to an external mouse and/or keypad. A standard PS2 mouse will plug directly into this socket, a PS2 keyboard needs an adapter. Connections are as follows:

Pin

Direction

Description

 

4

Out

+V for Keyboard/Mouse

 

3

Out

Supply Common for Keyboard/Mouse

 

1

In/Out

Mouse Data Line

 

5

In

Mouse Clock Line

 

2

In/Out

Keyboard Data Line

 

6

In

Keyboard Clock Line

Figure 3-15

 

 

 

An adapter is available that converts the single Mini Din Socket to two separate sockets, one for the mouse and one for the keyboard.

Page 22

09/11/2008 REV 0.99

Page 30 Page 32
Image 31
Page 30 Page 32
Contents User’s Guide Servicing North America Table of Contents Wiring Specifications and Procedures Environment and Location InstallationDisplay Elements Browsing Annotations Timer/Totalizer Reset Special EventsTurning the unit off Annotating Trends Browsing Historic DataDigital Input/Output AlarmsRecord Setup System Administrative Menu102 Touch Screen Cleaning Instructions CalibrationWorld Wide Web Web Based FTP Manager Ethernet Protocols USB Connections Utility ProgramsTrademarks Symbols09/11/2008 REV General Description OverviewSystem Overview System Overview09/11/2008 REV Display Area Recorder FrontStylus Status IndicatorMedia Door IR Comm PortRecorder Rear Panel Power SupplyAnalog Inputs Computer Interface Input/Output ModuleFiles Configuration FilesMiscellaneous Files Exhibitor SoftwareData Files Activity FilesQuick Start Guide Security KeyboardingHelp Activity LightsUser Levels Remote Access PasswordsEnvironment and Location Equipment HandlingRecorder Dimensions in Inches mm InstallationFront Panel Cut Out Panel MountingRear View Panel Insertion Panel Front GasketPower Requirements Wiring Specifications and ProceduresPower Connections Rear Panel Signal Input WiringLinear Inputs Resistance Temperature Detector RTD InputsAnalog Inputs Thermocouple InputsFrequency Potential Free ContactsRelay Output, Contact Input EthernetAudio Connection USB ConnectionMouse and Keyboard Connection Isolated Serial Interface Option 24Vdc Isolated Output Option18 RS485 Adapter 19 RS485 120 Ohm Jumper Live Display Area Display ElementsTask Bar Utility Setup Menu Utility Setup Menu09/11/2008 REV Record Session Alarm, Event and Activity LogsFolder Mydata Data File Mydata.dat Bitmap Files Text Files Load Configuration Configuration ManagerE-mail Window Sending EmailDisplay Utilities User LoginDisplay Brightness Background Color Timer/Totalizer ResetRecord on Alarm Special EventsAlarm Master Setup Email on Alarm EventRecord Setup Digital Input Setup Record Mode System SetupDrawing on the Screen Annotating TrendsAdding a Text Message Browsing Historic Data13.4 Zoom with point markers Zoom and Compress Data13.6 Memo View 13.7 Bitmap View Using the Cursor13.8 Cursor Mode View Memos and BitmapsBrowsing Annotations Using Browser Jump ToSetup display as shown right Master Channel SetupInput Channels Channel Setup Channel SetupLinear Input Channel Type SetupResistance Input Thermocouples and RTDs Industrial Square Root ExtractionCalculated Input Calculated Channel Setup09/11/2008 REV Conditional Input Gated TimerTotalizer Reset PointFrequency Frequency/Pulse CountPulse Count 13 Pulse Count SetupRecorder Setup Building the Display Display Builder3 Display Builder EditingRotate List Will show OFF Digital Display SetupWidgets Digital DisplaysDisplaying Min, Max or Average Values Channel. For information only Bar Graph SetupBar Graphs Channel Type Shows the current widget style for09/11/2008 REV 09/11/2008 REV Trend Setup Window Trend Setup09/11/2008 REV Rate Alarms1 Alarm Master Setup Alarm Master SetupAlarm Setup Digital Input/Output 1 Digital Output Setup Digital Output SetupDigital Input Setup 09/11/2008 REV Select Channels Record SetupPoint type Max Min Average Media and FilenameRecord Rate What to RecordSplit Files Timed RecordTriggered Record Media Alarm System Admin Menu System Administrative Menu09/11/2008 REV System Setup Temperature CompensationNTP Time Server Menu Timeout Modbus SettingsMouse Pointer Enable Config Auto SaveUser User Setup Password ManagementFile Explorer 6 Network IP Address Network Settings7 Web User Admin Web User ManagerSet ActiveSync Password Smtp Email Settings9 USB ActiveSync Password Registry System ReFlash Languages09/11/2008 REV World Wide Web Communication3 View Recorder Web Based FTP Manager 2 FTP File Manager Communication OPC Server Ethernet ProtocolsModbus Status Registers Modbus ServerModbus Data Registers Register # USB Connections FTP Manager Utility Programs09/11/2008 REV 09/11/2008 REV Remote Display Remote Control3 Remote Recorder 4 Remote Manager Remote Manager5 Remote Manager Connected Touch Screen Cleaning InstructionsCalibration Full Cal Calibrating Linear Voltage InputsSet Channel Zero CalCalibrating the RTD Current Source Store CalCalibrating Frequency Go to Table of Contents Power Fail Protection Resolution ColorVirtual Chart Speed Power RequirementsType Range C Accuracy C Range F Accuracy F Recording Rates SafetyDimensions WeightAppendix B Digital Input Voltage Adjustment Fig B-4 Digital IO Module Jumpers 2 Channel shown Input BoardWARRANTY/DISCLAIMER Temperature

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.
Top Page Image Contents