NetComm NP2500 manual Select to enable or disable the PoE function, Power limit, Current

	Figure 26. PoE Port Setting
	Select to enable or disable the PoE function.
Power limit:	This function let you to manually setting the port power current limitation
	to be given to the PD, to protect the Switch and the connected device,
	the power limit function will disable the PoE function of the port when the
	power over loaded. Select “<5W”, “<10W”, “<14W” and “Auto” for the
	power limit, the “Auto” will follow the classification from the PD power
	current.
POE System Setting:	Selected “POE System Setting” to configure the PoE System setting.

Figure 27. PoE System Setting

System power Threshold: When the radio of the system power supply large than or smaller than the System power Threshold setting, the Switch will send trap event to the Management Station.

Note:	When the system power is shortage with the PD, the Switch will enforce the PoE port
	priority management, the lower port number will have the higher priority than the higher
	port number, Port 1 > Port 2 > … > Port 24.

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide	31
YML842 Rev1