| Operating: 0o ~ 40o C (32o ~ 104o F), Storage: | |
| F) |
|
Humidity | Operating: 10% ~ 90%, Storage: 5% ~ 90% | |
Dimensions | 440 x 310 x 44 mm | |
EMI: | FCC Class A, CE Mark Class A, VCCI Class A | |
Safety: | cUL(UL60950), CB(IEC60950) | |
Performance |
|
|
Transmits Method: | ||
Filtering Address Table: | 4K entries per device | |
Packet Filtering/Forwarding Rate: | 10Mbps Ethernet: 14,880/pps | |
| 100Mbps Fast Ethernet: 148,800/pps | |
| 1000Mbps Gigabit Ethernet: 1,488,000/pps | |
MAC Address Learning: | Automatic update | |
Transmits Method: | ||
RAM Buffer: | 768K bytes per device | |
WARNINGS |
|
|
FCC Warning |
|
|
This equipment has been tested and found to comply with the regulations for a Class A digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his or her own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
VCCI Warning
This is a product of VCCI Class A Compliance.
UL Warning
a)Elevated Operating Ambient Temperature- If installed in a closed or
b)Reduced Air Flow- Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
NP2500 | 39 |
YML842 Rev1 |
|