Net Optics manual Appendix a Director Specifications, Specifications, chassis

Page 45

Director

Appendix A

Director Specifications

Specifications, chassis

Mechanical

Dimensions: 1.6” high x 15.65” deep x 17” wide

Mounting: Surface or 19” rack mount (1U)

Weight: TBA

Connectors

Network Port Slots: (2) Director Network Module (DNM)

Monitor Ports: (10) SFP

Configurable 10Gigabit Ports: (4) XFP (2 can be used for uplinks to daisy-chain chassis)

Management Port: (1) RJ45 10/100/1000 Copper Network

Configuration (CLI) Port: (1) RS-232 DB9

USB Port: (1) Reserved for future functionality

Power: (2) AC universal

Electrical Interface

Power: 100-240VAC, 2A, 47-63Hz (Japan: 100‑125VAC, ~120 VA, 50-60Hz), -48VDC available

Indicators

(All ports) Link LEDs (with speed indication on Copper ports),

(All ports) Activity LEDs

(1) Alarm LED

(2) Power LEDs

Performance

Hardware throughput: 74Gbps

TapFlow Smart filtering: More than 1,000 filter elements per chassis; filter by IP source address , IP destination ad- dress, MAC source address, MAC destination address, source port, destination port, protocol, network port or port group, VLAN

RMON statistics for each Network and Monitor port: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets

Internal disk drive: 2.5-inch, SATA, 30 Gigabyte, 5400 RPM

Software

Net Optics Web Manager—compatible with all major Web browsers

Net Optics System Manager—compatible with Windows XP, Windows 2000, and Windows 98

SNMP v3 support

41

Image 45

Contents Data Monitoring Switch Trademarks and Copyrights Contents Chapter Chapter Configuring Filters Using the CLIAppendix a Appendix BChapter Introduction Ease of Use Key FeaturesMonitor port Filtering Passive, Secure TechnologyDescription About this GuideDirector internal architecture Director ArchitectureDirector Management USB portNetwork Links Typical ApplicationMonitoring Tools In-line Monitoring of 10 Gigabit Links 10 Gigabit in-line network connection using a network TapDirector Front Panel Power LEDsMonitor Port LEDs DNM / Network Port LEDsXFP Director Rear PanelChapter Installing Director Unpack and Inspect the Director device Plan the InstallationInstall Director Network Modules Install SFP and XFP Monitor port ModulesRack Mount the Director device Connect the local CLI Interface Connect Power to DirectorBaud Data bits No parity 1 stop bit No flow control Connect the remote CLI InterfaceTip To connect the CLI for remote use over the Management portTo log into the CLI Log into the CLIConfigure Director using the CLI Change Director PasswordTo change the login password Assign a New Manager IP Address To change the port modeTo assign a new Manager IP address to Director Change Port ModesSet the Current Date and Time Save and Load Director ConfigurationsTo view CLI help information Using the CLI Help CommandShow name show running, factory, default, or file name Using the CLI Command History BufferTo connect a Span port Connect Span Ports to DirectorTo connect an in-line network link Connect Director With In-line Network LinksConfigure a Matrix Switch connection in Director Check the InstallationConnect Monitoring Tools to Director Syntax Chapter Configuring Filters Using the CLICopy Traffic From Any Network Port to Any Monitor Port Enter filter commit. The switch connection is activatedLter add inports=n1.1 action=redir redirports=m.3-m.5 Regenerate Traffic to Any Set of Monitor PortsTo create a filter that selects IPv4 packets by protocol Create FiltersLogical and filter connection Create Complex FiltersUDP View filtersConfigurable 10 Gigabit XFP ports used as Network ports Work with configurable 10 Gigabit portsXFP Port Protocol = Monitor Port CAM Understand filter interactionsFlow diagram now looks as follows N1.1 ipproto=UDP action=drop N1.1 m.1 Exclusive filtersUnderstand pending and active filters To change the Director filter configurationFilter running command Enter filter list to view the pending filter list Inports=n1.1-n1.7 Ipproto=6 Vlan=100 Redirports=m.1-m.5,m.10 Filter capacityDaisy-chaining Multiple Director Chassis Specifications, chassis Appendix a Director SpecificationsEnvironmental Specifications, DNMCertifications Available ModelsAppendix B Command Line Interface Commit Command Sub-Command Arguments Example and descriptionFilter discard Image Quit User add name=bob pw=bob-pw priv=3 Filter parameters Vlan=128 Director Filter Parameters Qual Value Example DescriptionNum Keyword Protocol Appendix C Protocol NumbersMobile L2TP Limitations on Warranty and Liability By Net Optics, Inc. All Rights Reserved