Net Optics Director manual Specifications, DNM, Environmental, Certifications, Available Models

Page 46

Director

Specifications, DNM

Copper Interface

(12) RJ45 Network Ports 10/100/1000Mbps

(6) In-line links or (12) Span ports depending on model

22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interface

(12) Gigabit SX, LX, or ZX Network Ports, LC type

(6) In-line links or (12) Span ports depending on model Fiber Types: Corning Multimode 62.5/125μm

Corning Multimode 50/125μm

Corning Singlemode 8.5/125μm

Transceiver: SX GigaBit 850nm, VCSEL, supports 62.5/125μm

SX GigaBit 850nm, VCSEL, supports 50/125μm

LX GigaBit 1310nm, laser, supports 8.5/125μm

ZX GigaBit 1550nm, laser, supports 8.5/125μm

Safety: Class 1, eye-safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Environmental

Operating Temperature: 0˚C to 55˚C

Storage Temperature: -10˚C to 70˚C

Relative Humidity: 10% min, 95% max, non-condensing

Certifications

FCC, CE, FCC, VCCI, C-Tick, and WEEE certified

Fully RoHS compliant

Available Models

Models, Main Chassis

DIR-3400 Director Main Chassis with 10 SFP monitor ports

DIR-7400 Director Main Chassis with 10 SFP monitor ports, 2 XFP 10GbE ports, 2 XFP uplink ports

DNMs

DNM-100 6-Port 10/100/1000 Copper In-Line Module

DNM-110 12-Port 10/100/1000 Copper Span Module

DNM-200 6-Port Gigabit SX Fiber 62.5μm In-Line Module

DNM-210 12-Port Gigabit SX Fiber 62.5μm Span Module

DNM-220 6-Port Gigabit SX Fiber 50μm In-Line Module

DNM-230 12-Port Gigabit SX Fiber 50μm Span Module

DNM-300 6-Port Gigabit LX Fiber In-Line Module

DNM-310 12-Port Gigabit LX Fiber Span Module

DNM-320 6-Port Gigabit ZX Fiber In-Line Module

DNM-330 12-Port Gigabit ZX Fiber Span Module

42

Image 46

Contents Data Monitoring Switch Trademarks and Copyrights Contents Appendix a Chapter Configuring Filters Using the CLIChapter Appendix BChapter Introduction Monitor port Filtering Key FeaturesEase of Use Passive, Secure TechnologyAbout this Guide DescriptionDirector Architecture Director internal architectureUSB port Director ManagementTypical Application Network LinksMonitoring Tools 10 Gigabit in-line network connection using a network Tap In-line Monitoring of 10 Gigabit LinksMonitor Port LEDs Power LEDsDirector Front Panel DNM / Network Port LEDsDirector Rear Panel XFPChapter Installing Director Plan the Installation Unpack and Inspect the Director deviceInstall SFP and XFP Monitor port Modules Install Director Network ModulesRack Mount the Director device Connect Power to Director Connect the local CLI InterfaceTip Connect the remote CLI InterfaceBaud Data bits No parity 1 stop bit No flow control To connect the CLI for remote use over the Management portLog into the CLI To log into the CLIChange Director Password Configure Director using the CLITo change the login password To assign a new Manager IP address to Director To change the port modeAssign a New Manager IP Address Change Port ModesSave and Load Director Configurations Set the Current Date and TimeUsing the CLI Help Command To view CLI help informationUsing the CLI Command History Buffer Show name show running, factory, default, or file nameConnect Span Ports to Director To connect a Span portConnect Director With In-line Network Links To connect an in-line network linkCheck the Installation Configure a Matrix Switch connection in DirectorConnect Monitoring Tools to Director Chapter Configuring Filters Using the CLI SyntaxEnter filter commit. The switch connection is activated Copy Traffic From Any Network Port to Any Monitor PortRegenerate Traffic to Any Set of Monitor Ports Lter add inports=n1.1 action=redir redirports=m.3-m.5Create Filters To create a filter that selects IPv4 packets by protocolCreate Complex Filters Logical and filter connectionView filters UDPWork with configurable 10 Gigabit ports Configurable 10 Gigabit XFP ports used as Network portsXFP Port Protocol = Monitor Port Understand filter interactions CAMFlow diagram now looks as follows Exclusive filters N1.1 ipproto=UDP action=drop N1.1 m.1To change the Director filter configuration Understand pending and active filtersFilter running command Enter filter list to view the pending filter list Filter capacity Inports=n1.1-n1.7 Ipproto=6 Vlan=100 Redirports=m.1-m.5,m.10Daisy-chaining Multiple Director Chassis Appendix a Director Specifications Specifications, chassisCertifications Specifications, DNMEnvironmental Available ModelsAppendix B Command Line Interface Command Sub-Command Arguments Example and description CommitFilter discard Image Quit User add name=bob pw=bob-pw priv=3 Filter parameters Director Filter Parameters Qual Value Example Description Vlan=128Appendix C Protocol Numbers Num Keyword ProtocolMobile L2TP Limitations on Warranty and Liability By Net Optics, Inc. All Rights Reserved