Magnum 700X | Installation and User Guide (05/98) |
(1.1 Technical Specifications, continued) Connectors
Seven Magnum PM ports on the front. BPMs are available with BNC, AUI, FST, and STP connectors. The following are available as RPM configurations.
Shielded, | |
| connectors accept either unshielded or shielded wiring |
| plugs for standard twisted pair media wiring.) |
Fiber Optic: | ST |
Fiber Optic: | SMA |
ThinNet: | BNC |
AUI: | |
DTE: |
Note: Port Modules are also used with the Magnum 3000X, and as the Bonus Port modules for Magnum Stackable and Workgroup Hubs. All Port Modules should be installed at the factory or by trained technicians.
Packaging
Enclosure: High strength sheet metal.
Suitable for wiring closet shelf, wall or desktop mounting.
Port Module Slots: 7
Dimensions: 6.0 in x 10.0 in. x 3.5 in. (15.25 cm x 25.4 cm x 8.89 cm)
Weight: 2.5 lb. (1.1 Kg)
Port Slot
Cooling method: Convection
LED Indicators on Chassis
Four chassis LEDs monitor the general status of the unit including network traffic.
PWR - Power, Green LED, steady ON indicates there is AC power. RX - Receive, Green LED, blinks to indicate network activity, data
being received from any of the PMs.
JAB - Jabber, Amber LED, illuminates when jabber condition (illegal packet size) is detected on any port; affected port is partitioned temporarily until jabber stops.
COL - Collision, Yellow LED, flashes when a collision is detected on any of the PMs.
For the LEDs on each PM, see "Product Description" of the PMs.
Agency Approvals |
|
UL Listed (UL 1950), cUL, CE |
|
Emissions: meets FCC Part 15, Class A |
|
Warranty |
|
Three years, return to factory | Made in USA |
GARRETT
2