GarrettCom manual Ordering Information Magnum 700X Mini-Concentrator

Magnum 700X Mini-Concentrators Installation and User Guide (05/98)

1.4Ordering Information

Magnum 700X Mini-Concentrator

Magnum 700X	Base chassis with 7 slots for RPMs and BPMs, power supply
Magnum 700X-Br	Multi-Bridge chassis with one RJ-45 RPM for the common port, and 6
	slots for BPMs and other RPMs, power supply. Includes 5 face plates.
Magnum RPM-BNC	Repeater Module with 1 BNC connector, internal termination switch
Magnum RPM-TP	Repeater Module w/ 1 shielded female RJ-45 connector + up-link
	switch
Magnum RPM-AUI	Repeater Module with 1 AUI (DB-15 female) connector, with slide
	lock
Magnum RPM-DTE	Repeater Module with 1 DTE (DB-15 male) connector, with lock
	posts
Magnum RPM-FST	Repeater Module w/ mm* Fiber ST “twist” 10BASE-FL dual
	connector
Magnum RPM-SMF	Repeater Module w/ single mode Fiber connector
Magnum RPM-FSM** Repeater Module w/ mm* Fiber SMA “screw-on” 10BASE-FL
	connector
Magnum BPM-BNC	Local Bridge Module with 1 BNC connector
Magnum BPM-AUI	Local Bridge Module with 1 AUI connector
Magnum BPM-FST	Local Bridge Module with mm* Fiber ST connector
Magnum BPM-TP	Local Bridge Module with 1 RJ-45 connector + up-link switch
Magnum PM-FP	Face Plate - cover for unused slots

NOTE: All RPMs and BPMs have LEDs for status information. Refer to Product Description for details.

*mm = multi-mode

**This item is available by special order only.

Note: All PMs are interchangeable for use with the Magnum 3000X Stackable Concentrators and Magnum 3000 Stackable Hubs bonus ports, and the Magnum 1000 Workgroup Hubs bonus ports. The same PMs are also used in the Magnum 30X Workgroup Bridges and the Magnum 200X and 20X Two-port Repeaters.

Garrett Communications reserves the right to change specifications, performance characteristics and/or model offerings without notice.

GARRETT

4