GarrettCom Magnum 6K32T user manual 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module

Page 49

Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.

5.2.1a 6KP6-RJ10ST, 4@10/100Mbps RJ-45 and 2@10Mb multi-mode FX-ST “twist lock” Combo Module

The 6KP6-RJ10ST is a six port combo module that looks similar to the 100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K32T Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full- duplex and half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON, 100Mbps if it is OFF, 10Mbps.

5.2.1b

6KP4-F10ST, 4@10Mb multi-mode FX-ST “twist lock” Module

The Magnum 6KP4-F10ST

 

 

 

6KP4-RJ10MST,

 

is a 10Mb multi-mode

 

4 Port@ 10Mb ST Fiber Port

 

fiber module with 4 ST-

 

 

 

2

 

 

 

Fiber ports. All four fiber

 

ACT

 

 

ACT

 

 

ports are ST connectors

 

 

 

 

 

 

F/H

 

 

F/H

 

1

and configured as 10Mb

3

1

TX

LK RX

5

TX

RX

ACT

 

 

ACT

 

 

 

 

 

 

 

 

 

Half-duplex by default.

 

F/H

TX

LK RX

F/H

LK

RX

The 10Mb ST-fiber ports

 

2

6 T

 

1

 

LINK

2

ACTIVITY

allow the user to connect

 

 

 

 

 

 

 

 

 

their legacy 10Mb network

 

3

FULL/HALF

 

 

to the Magnum 6K32T

 

 

 

 

 

 

 

switch. They also provide a convenient way for the half duplex

 

 

hub to connect to the switch through 10Mb fiber ports. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a special order).

www . GarrettCom . com

43

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Managed Switch Trademarks Canadian Emission Contacting GarrettCom, IncIntroduction Table of ContentsMagnum 6K32T Managed Switch Port Modules Personal Hubs, 10Mb series Personal Switches, 10/100MbTechnical Specifications Management Console connector Fiber connector types supportedPower Supply Internal LEDs Per PortPer-port MDI or Mdix on RJ-45 Relay Alarm Contact OptionalAgency Approvals Ordering Information Configuration OptionsMagnum 6K32T Port Modules Gigabit Transceiver optionsWww . GarrettCom . com Introduction Inspecting the Package and Product Product Description Magnum 6K32T Managed Switch 1a Magnum 6K32T Chassis 1b New Magnum 6K32T Chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Mode for best fiber distance100Mb fiber eight Port modules for the Magnum Eight-Port Copper Module, 6K8-RJ45 @RJ-45 + 2@ 100Mb Four-Port 10 Mb mm Fiber ST ModulesST or SC Gigabit 1000Mbps port modules Frame Buffering and Flow Control Packet Prioritization, 802.1p QOSMIBs for Snmp visit Managed Network Software MNS-6K for Magnum 6K32T„ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Applications Example 1 Magnum 6K32T Switch for a Vlan applicationData Example 3 Redundant Application Www . GarrettCom . com Www . GarrettCom . com Locating Magnum 6K32T Switches InstallationConnecting Fiber Optic ST-type, twist-lock Connecting Ethernet MediaIeee Standard Media Type Max. Distance Port Module Fiber CopperConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Twisted Pair CAT-5e 1000BASE-T F10ST Rack-mounting for 19 Retma racks, Magnum 6K32T’s Table-Top or Shelf MountingMagnum 6K32T unit. These 1 Dual Side-Mountings for Magnum 6K32T units Rack-mounting, Reverse version of the Magnum 6K32T’sPowering the Magnum 6K32T Managed Switch Preparation for Installing and Removing 6KPMs 6K32T Port Module 6KPM InstallationRemove Chassis Cover 1d Top View 6KPM retaining screws hold Face Plate Installing 6KPM Cards in the Magnum 6K32TWww . GarrettCom . com 2g Top View 6KPM Module installed inside a 6K32T Switch Firmly. .5.3a Top View 6 retaining screws shown by arrows Removing 6KPM CardsConsole DB-9 Port Connecting the Console Terminal to Magnum 6K32T ManagementRemove 6KPM Card Rear View of Magnum 6K32TSwitching Functionality Pin Signal DescriptionDB-9 Console port connector 1 RS-232 DB-9 Console Com port Serial port pin assignmentsPWR Status LEDsACT Auto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 ports Www . GarrettCom . com Flow-control, Ieee 802.3x standard Magnum 6K32T Managed Switch Port Modules6KPM Module Description 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module As 10Mb Half-duplex by Default for 10Mb fiber Connectors and configuredMagnum 6KP4 Flstfx is a combo fiberMode SC-type connectors. It Mode 100Mbps fiber opticTransceivers all in one module. This Activity ACT, Link LK,Www . GarrettCom . com Port@ 100Mbps Multi-Mode Fiber port 6KP8-MTRJActivity FULL/HALF Link7 6KP8-MLC, 8 ports @ 100Mbps multi-mode LC connector Small 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Give an advantage of placing more Small size of LC connectorsPorts on one module. The 6KP8-45 11a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC @ 1000Mb Fiber SC + 2@ 100Mb SCBefore Calling for Assistance 12 6KM-BLNKReturn Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem FoundB1.0 Specifications for Magnum 6K32T SWITCHES, DC Power Appendix B Internal DC Power Supply OptionsPower Supply Internal -48VDC Option B4.0 Installation B3.0 Applications for DC Powered SwitchesB7.0 Troubleshooting Appendix C Internal DC Dual-Source Power OptionB5.0 Operation B6.0 Ordering InformationC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 Installation C6.0 Ordering Information C5.1 UL RequirementsExample Magnum 6K32T & 6K32-48VDC C7.0 Operation
Top Page Image Contents