GarrettCom Magnum 6K32T user manual Www . GarrettCom . com

Page 52

Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)

10/100 LED indicates 100Mbps speed when lit and 10Mbps speed when off. To distinguish the single-mode 6 K6-RJSSC from the multi-mode 6K6-RJMSC, the label “Sgl. M.” is at the top of the faceplate of the 6K6-RJSSC.

5.2.46KP6-RJSSCL 4 @ 10/100 Mb copper port and 2@100Mbps single-mode FX-SC-type, “snap-in” connector

The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual speed copper ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a combination of copper and Fiber functions in one module to the 6K32T Switches, supporting four Copper and two single-mode (Long-Reach) fiber network segments.

The 6KP6-RJSSC, when installed in a Magnum 6K32T Switch has copper supporting the 100m distance and Fiber supporting single-mode fiber cable lengths of as much as 40+ Km (see Power Budget, Section 4.5)

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed for the copper port, which is 100Mbps when the LED is ON and 10 Mb when the LED is OFF.

5.2.4a 6KP6-RJ10ST 4 @ 10/100 Mb copper port and 2@10Mbps multi-mode FL-ST-type, “twist-lock” connector

The Magnum 6KP6-RJ10ST is also a Combo module equipped with 4 dual speed copper ports and 2 multi-mode 10 Mb fiber ST-type connectors. It provides a combination of copper and Fiber functions in one module to the 6K32T Switches, supporting four Copper and two 10Mb of ST fiber network segments.

The 6KP6-RJ10ST, when installed in a Magnum 6K32T Switch has copper supporting the 100m distance and Fiber supporting multi-mode fiber cable allow to connect the legacy network of 10Mb requirement in the network. Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed for the copper port, which is 10Mbps when the LED is ON and 10 Mb when the LED is OFF.

www . GarrettCom . com

46

Image 52

Contents Managed Switch Trademarks Contacting GarrettCom, Inc Canadian EmissionTable of Contents IntroductionMagnum 6K32T Managed Switch Port Modules Personal Switches, 10/100Mb Personal Hubs, 10Mb seriesTechnical Specifications Fiber connector types supported Management Console connectorPower Supply Internal LEDs Per PortPer-port MDI or Mdix on RJ-45 Relay Alarm Contact OptionalAgency Approvals Configuration Options Ordering InformationMagnum 6K32T Port Modules Gigabit Transceiver optionsWww . GarrettCom . com Introduction Inspecting the Package and Product Product Description Magnum 6K32T Managed Switch 1a Magnum 6K32T Chassis 1b New Magnum 6K32T Chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Mode for best fiber distance100Mb fiber eight Port modules for the Magnum Eight-Port Copper Module, 6K8-RJ45 @RJ-45 + 2@ 100Mb Four-Port 10 Mb mm Fiber ST ModulesST or SC Gigabit 1000Mbps port modules Packet Prioritization, 802.1p QOS Frame Buffering and Flow ControlManaged Network Software MNS-6K for Magnum 6K32T MIBs for Snmp visit„ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Example 1 Magnum 6K32T Switch for a Vlan application ApplicationsData Example 3 Redundant Application Www . GarrettCom . com Www . GarrettCom . com Installation Locating Magnum 6K32T SwitchesConnecting Ethernet Media Connecting Fiber Optic ST-type, twist-lockIeee Standard Media Type Max. Distance Port Module Fiber CopperConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Twisted Pair CAT-5e 1000BASE-T F10ST Rack-mounting for 19 Retma racks, Magnum 6K32T’s Table-Top or Shelf MountingMagnum 6K32T unit. These Rack-mounting, Reverse version of the Magnum 6K32T’s 1 Dual Side-Mountings for Magnum 6K32T unitsPowering the Magnum 6K32T Managed Switch 6K32T Port Module 6KPM Installation Preparation for Installing and Removing 6KPMsRemove Chassis Cover Installing 6KPM Cards in the Magnum 6K32T 1d Top View 6KPM retaining screws hold Face PlateWww . GarrettCom . com 2g Top View 6KPM Module installed inside a 6K32T Switch Removing 6KPM Cards Firmly. .5.3a Top View 6 retaining screws shown by arrowsConnecting the Console Terminal to Magnum 6K32T Management Console DB-9 PortRemove 6KPM Card Rear View of Magnum 6K32TPin Signal Description Switching FunctionalityDB-9 Console port connector 1 RS-232 DB-9 Console Com port Serial port pin assignmentsPWR Status LEDsACT Auto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 ports Www . GarrettCom . com Magnum 6K32T Managed Switch Port Modules Flow-control, Ieee 802.3x standard6KPM Module Description 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Connectors and configured As 10Mb Half-duplex by Default for 10Mb fiberMagnum 6KP4 Flstfx is a combo fiberMode 100Mbps fiber optic Mode SC-type connectors. ItTransceivers all in one module. This Activity ACT, Link LK,Www . GarrettCom . com 6KP8-MTRJ Port@ 100Mbps Multi-Mode Fiber portActivity FULL/HALF Link7 6KP8-MLC, 8 ports @ 100Mbps multi-mode LC connector Small 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Give an advantage of placing more Small size of LC connectorsPorts on one module. The 6KP8-45 GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector 11a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC + 2@ 100Mb SC @ 1000Mb Fiber SC12 6KM-BLNK Before Calling for AssistanceWhen Calling for Assistance Return Material Authorization RMA ProcedureNo Problem Found Shipping and Packaging InformationB1.0 Specifications for Magnum 6K32T SWITCHES, DC Power Appendix B Internal DC Power Supply OptionsPower Supply Internal -48VDC Option B3.0 Applications for DC Powered Switches B4.0 InstallationAppendix C Internal DC Dual-Source Power Option B7.0 TroubleshootingB5.0 Operation B6.0 Ordering InformationC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 Installation C5.1 UL Requirements C6.0 Ordering InformationExample Magnum 6K32T & 6K32-48VDC C7.0 Operation