GarrettCom Magnum 6K32T user manual Technical Specifications

Page 7

Magnum 6K32 & 6K32T Managed Switch

Installation and User Guide (12/05)

1.0SPECIFICATIONS

1.1Technical Specifications

Performance

Filtering / Forwarding Rate: Ethernet:14,880 pps Fast Ethernet: 148,800 pps Gigabit Ethernet: 1,488,000 pps

Switching Processing Type: Store and Forward with IEEE 802.3x full- duplex flow -control, non-blocking

Data Rate: 10Mbps,100Mbps and 1000Mbps

Address Table Capacity: 4K node, self-learning with address aging Packet buffer size : 240KB for 10/100 and 120KB for 1000Mb

Latency: 5 ∝s + packet time (100 to 100Mbps)

15 ∝s + packet time (10 to 10 Mbps, and 10 to 100Mbps)

Network Standards and Compliance

Ethernet V1.0/V2.0 IEEE 802.3: 10BASE-T,

IEEE 802.3u: 100Base-TX, 100BASE-FX

IEEE 802.3z: 1000BASE-X Ethernet(Auto-negotiation)

IEEE 802.3ab: 1000BASE-X Ethernet

IEEE 802.1p: Priority protocol

IEEE 802.1d: Spanning tree protocol

IEEE 802.1w: Rapid Spanning tree protocol

IEEE 802.1q: VLAN Tagging

IEEE 802.3x: Flow Control

IEEE 802.3ad: Link Aggregation (Trunking)

Maximum 10 Mbps Ethernet Segment Lengths
Unshielded twisted pair	-	100 m (328 ft)
Shielded twisted pair	-	150 m (492 ft)
10BASE-FL multi-mode fiber optic	-	2 km (6,562 ft)
10BASE-FL single-mode fiber optic	-	10 km (32,810 ft)
Maximum Standard Fast Ethernet Segment Lengths:
10BASE-T (CAT 3, 4, 5 UTP)	-	100 m (328 ft)
100BASE-TX (CAT 5 UTP)	-	100 m (328 ft)
Shielded twisted pair	-	150 m (492 ft)
100BASE-FX, half-duplex, multi-mode	-	412 m (1350 ft)
100BASE-FX, full-duplex, multi-mode	- 2.0 km (6,562 ft)
100BASE-FX, half-duplex, single-mode	- 412 m (1350 ft)
100BASE-FX, full-duplex, single-mode	- 20.0 km (6K32T ft)
100BASE-FX, full-duplex, Long Reach	-	40.0 km (122K ft)
Maximum Standard Gigabit Ethernet Segment Lengths:
1000BASE-T (CAT5E or higher is recommended)		- 100 m

1000BASE-SX, full-duplex, multi-mode(62.5∝m cable) - 220m 1000BASE-SX, full-duplex, multi-mode(50∝m cable) - 550m 1000BASE-LX, full-duplex, single-mode(62.5∝m cable) -5Km

www . GarrettCom . com

1

Image 7

Contents Managed Switch Trademarks Canadian Emission Contacting GarrettCom, IncIntroduction Table of ContentsMagnum 6K32T Managed Switch Port Modules Personal Hubs, 10Mb series Personal Switches, 10/100MbTechnical Specifications LEDs Per Port Fiber connector types supportedManagement Console connector Power Supply InternalPer-port MDI or Mdix on RJ-45 Relay Alarm Contact OptionalAgency Approvals Gigabit Transceiver options Configuration OptionsOrdering Information Magnum 6K32T Port ModulesWww . GarrettCom . com Introduction Inspecting the Package and Product Product Description Magnum 6K32T Managed Switch 1a Magnum 6K32T Chassis 1b New Magnum 6K32T Chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Mode for best fiber distance100Mb fiber eight Port modules for the Magnum Eight-Port Copper Module, 6K8-RJ45 @RJ-45 + 2@ 100Mb Four-Port 10 Mb mm Fiber ST ModulesST or SC Gigabit 1000Mbps port modules Frame Buffering and Flow Control Packet Prioritization, 802.1p QOSMIBs for Snmp visit Managed Network Software MNS-6K for Magnum 6K32T„ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Applications Example 1 Magnum 6K32T Switch for a Vlan applicationData Example 3 Redundant Application Www . GarrettCom . com Www . GarrettCom . com Locating Magnum 6K32T Switches InstallationCopper Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock Ieee Standard Media Type Max. Distance Port Module FiberConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Twisted Pair CAT-5e 1000BASE-T F10ST Rack-mounting for 19 Retma racks, Magnum 6K32T’s Table-Top or Shelf MountingMagnum 6K32T unit. These 1 Dual Side-Mountings for Magnum 6K32T units Rack-mounting, Reverse version of the Magnum 6K32T’sPowering the Magnum 6K32T Managed Switch Preparation for Installing and Removing 6KPMs 6K32T Port Module 6KPM InstallationRemove Chassis Cover 1d Top View 6KPM retaining screws hold Face Plate Installing 6KPM Cards in the Magnum 6K32TWww . GarrettCom . com 2g Top View 6KPM Module installed inside a 6K32T Switch Firmly. .5.3a Top View 6 retaining screws shown by arrows Removing 6KPM CardsRear View of Magnum 6K32T Connecting the Console Terminal to Magnum 6K32T ManagementConsole DB-9 Port Remove 6KPM Card1 RS-232 DB-9 Console Com port Serial port pin assignments Pin Signal DescriptionSwitching Functionality DB-9 Console port connectorPWR Status LEDsACT Auto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 ports Www . GarrettCom . com Flow-control, Ieee 802.3x standard Magnum 6K32T Managed Switch Port Modules6KPM Module Description 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Flstfx is a combo fiber Connectors and configuredAs 10Mb Half-duplex by Default for 10Mb fiber Magnum 6KP4Activity ACT, Link LK, Mode 100Mbps fiber opticMode SC-type connectors. It Transceivers all in one module. ThisWww . GarrettCom . com Link 6KP8-MTRJPort@ 100Mbps Multi-Mode Fiber port Activity FULL/HALF7 6KP8-MLC, 8 ports @ 100Mbps multi-mode LC connector Small 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Give an advantage of placing more Small size of LC connectorsPorts on one module. The 6KP8-45 11a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC @ 1000Mb Fiber SC + 2@ 100Mb SCBefore Calling for Assistance 12 6KM-BLNKReturn Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem FoundB1.0 Specifications for Magnum 6K32T SWITCHES, DC Power Appendix B Internal DC Power Supply OptionsPower Supply Internal -48VDC Option B4.0 Installation B3.0 Applications for DC Powered SwitchesB6.0 Ordering Information Appendix C Internal DC Dual-Source Power OptionB7.0 Troubleshooting B5.0 OperationC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 Installation C7.0 Operation C5.1 UL RequirementsC6.0 Ordering Information Example Magnum 6K32T & 6K32-48VDC