GarrettCom Magnum 6K32T user manual Mode 100Mbps fiber optic, Transceivers all in one module. This

6KP6-RJMSSC,

4 Port@ 10/100Mbps and 2 @100 Mb SSC Fiber Port 2

4 Port@ 10/100Mbps and 2 @100 Mb SC Fiber Port 2

Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)

5.2.2.6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC “snap-in” Fiber connector

The Magnum 6KP6-

6KP6-RJMSC,

RJMSC is also a Combo 6 Port

module equipped with 4 10/100Mb

1

3

5

7

RJ-45 ports along with 2 multi-

10/100

LK

ACT

mode 100Mbps fiber optic

F/H

4

ACT

ACT

F/H

F/H

transceivers all in one module. This

TX

LK

RX

1

2 TX LK RX

6

LINK

2

10/100

is similar to the 6K6-RJMST. It has

the same LEDs indicating port

3

ACTIVITY

4

FULL/HALF

activity (ACT), Link (LK), and

FDX / HDX and 10/100 operation, and the same face-plate lettering.

1

3

While the functionality of these two modules is essentially the same, the 6KP6- RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type.

5.2.36KP6-RJSSC 4@ 10/100Mbps RJ-45 Ports and 2@100Mbps single-mode

FX-SC-type, “snap-in” connector

The Magnum 6KP6-RJSSC							1
is also a Combo module		1	3	5	7
		10/100				LK
equipped with 4 dual speed		F/H				ACT
	4	ACT		ACT
copper ports and 2 Single-		F/H		F/H			3
		2 TX	LKRX	6	TX LK	RX
mode SC-type connectors. It
	1	LINK		2	10/100
provides an advantage
through combining copper	3	ACTIVITY		4	FULL/HALF

and Fiber functions in one module of the 6K32T Switch supporting four Copper and two single-mode fiber network segments.

The 6KP6-RJSSC, when installed in a Magnum 6K32T Switch operates on copper at the 100m distance. The Fiber is single-mode and cable lengths can be as much as 25+ Km (see Power Budget, Section 4.5)

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The

www . GarrettCom . com

45