GarrettCom Magnum 6K32T user manual GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector

Page 57

Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)

2SLC is equipped with 6 10/100 RJ-45 ports and 2 Single-mode fiber ports. When installed in a Magnum 6K32T Switch, it supports the standard distances as mentioned on 5.2.4. and the LEDs also act similarly.

5.2.11GBIC-SXSC Gigabit fiber(1000Mb), multi-mode SC Connector

The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector

equipped with SC type connectors and can be easily snapped in and out. The Gigabit fiber ports are most popular as server-to-switch and switch-to-switch applications. It supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 550m at full duplex.

ACT
F/
TX	LK RX	3
1		3
10/100
F/

5 7

L

ACT

1@ 1000Mb Fiber SC + 4@10/ 100Mb

The GBIC transceiver has been offered in the modular slot with multiple options as per the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ- 45), whereas the single Gigabit module comes in flavor of G+2 (100Mb fiber ports) or G+4(10/100 RJ-45 ports) as shown in the above figure.

The GBIC transceiver is fastened using snap-in clips. Insert the transceiver (take care to insert it the right way up, arrows on top) until it clicks in space. While removing the transceiver, press the clips on either side of the transceiver at the same time and pull the transceiver out.

Each port has an Activity (ACT) LED indicating packets being received and a Link (LK) LED indicating proper connectivity with the remote device when lit.

5.2.11a GBIC-LXSC Gigabit fiber (1000Mb), multi-mode SC Connector

The Magnum GBIC-LXSC is a single-mode Gigabit fiber connector equipped with SC type connectors and can be easily snapped in and out. The Gigabit fiber ports are most popular as server-to-switch and switch-to-switch applications. It supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 10,25, 40 or 70Km at full duplex, and depend upon the Gigabit modules used.

www . GarrettCom . com

51

Image 57

Contents Managed Switch Trademarks Canadian Emission Contacting GarrettCom, IncIntroduction Table of ContentsMagnum 6K32T Managed Switch Port Modules Personal Hubs, 10Mb series Personal Switches, 10/100MbTechnical Specifications Management Console connector Fiber connector types supportedPower Supply Internal LEDs Per PortRelay Alarm Contact Optional Per-port MDI or Mdix on RJ-45Agency Approvals Ordering Information Configuration OptionsMagnum 6K32T Port Modules Gigabit Transceiver optionsWww . GarrettCom . com Introduction Inspecting the Package and Product Product Description Magnum 6K32T Managed Switch 1a Magnum 6K32T Chassis 1b New Magnum 6K32T Chassis Mode for best fiber distance Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber100Mb fiber eight Port modules for the Magnum Eight-Port Copper Module, 6K8-RJ45 Four-Port 10 Mb mm Fiber ST Modules @RJ-45 + 2@ 100MbST or SC Gigabit 1000Mbps port modules Frame Buffering and Flow Control Packet Prioritization, 802.1p QOSMIBs for Snmp visit Managed Network Software MNS-6K for Magnum 6K32TFeatures and Benefits „ Managed switching for high performance Ethernet LANs„ Features Fiber-Built-In Applications Example 1 Magnum 6K32T Switch for a Vlan applicationData Example 3 Redundant Application Www . GarrettCom . com Www . GarrettCom . com Locating Magnum 6K32T Switches InstallationConnecting Fiber Optic ST-type, twist-lock Connecting Ethernet MediaIeee Standard Media Type Max. Distance Port Module Fiber CopperConnecting Fiber Optic SC-type, Snap-In Connecting Single-Mode Fiber OpticMedia Ieee Standard Twisted Pair CAT-5e 1000BASE-T F10ST Table-Top or Shelf Mounting Rack-mounting for 19 Retma racks, Magnum 6K32T’sMagnum 6K32T unit. These 1 Dual Side-Mountings for Magnum 6K32T units Rack-mounting, Reverse version of the Magnum 6K32T’sPowering the Magnum 6K32T Managed Switch Preparation for Installing and Removing 6KPMs 6K32T Port Module 6KPM InstallationRemove Chassis Cover 1d Top View 6KPM retaining screws hold Face Plate Installing 6KPM Cards in the Magnum 6K32TWww . GarrettCom . com 2g Top View 6KPM Module installed inside a 6K32T Switch Firmly. .5.3a Top View 6 retaining screws shown by arrows Removing 6KPM CardsConsole DB-9 Port Connecting the Console Terminal to Magnum 6K32T ManagementRemove 6KPM Card Rear View of Magnum 6K32TSwitching Functionality Pin Signal DescriptionDB-9 Console port connector 1 RS-232 DB-9 Console Com port Serial port pin assignmentsStatus LEDs PWRACT Auto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 ports Www . GarrettCom . com Flow-control, Ieee 802.3x standard Magnum 6K32T Managed Switch Port Modules6KPM Module Description 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module As 10Mb Half-duplex by Default for 10Mb fiber Connectors and configuredMagnum 6KP4 Flstfx is a combo fiberMode SC-type connectors. It Mode 100Mbps fiber opticTransceivers all in one module. This Activity ACT, Link LK,Www . GarrettCom . com Port@ 100Mbps Multi-Mode Fiber port 6KP8-MTRJActivity FULL/HALF Link7 6KP8-MLC, 8 ports @ 100Mbps multi-mode LC connector Small 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Small size of LC connectors Give an advantage of placing morePorts on one module. The 6KP8-45 11a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC @ 1000Mb Fiber SC + 2@ 100Mb SCBefore Calling for Assistance 12 6KM-BLNKReturn Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem FoundAppendix B Internal DC Power Supply Options B1.0 Specifications for Magnum 6K32T SWITCHES, DC PowerPower Supply Internal -48VDC Option B4.0 Installation B3.0 Applications for DC Powered SwitchesB7.0 Troubleshooting Appendix C Internal DC Dual-Source Power OptionB5.0 Operation B6.0 Ordering InformationC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 Installation C6.0 Ordering Information C5.1 UL RequirementsExample Magnum 6K32T & 6K32-48VDC C7.0 Operation