GarrettCom manual Connecting the Console Terminal to Magnum 6K32 Management, Console DB-9 Port

Magnum 6K32 Managed Switch Installation and User Guide (02/05)

3.6Connecting the Console Terminal to Magnum 6K32 (Management)

Use a DB-9 “null modem” cable to connect the Magnum6K32 Console Port (the RS-232 port on the 6K32 Switch) to the your PC, so that your PC becomes the 6K32’s Console Terminal.

Note: The DB-9 cable does not include with the 6K32 unit package.

Console (DB-9)

Port

CONSOLE

PORT

O

OF

Rear View of Magnum 6K32, (Typical Console Port is on the Rear of Reverse 6K32 Models)

Note: For detail description of Managed Network Software (MNS-6K) and Magnum 6K32 Switch configuration for Network Management, please refer to Magnum 6K32 Software Manual available on GarrettCom‘s FTP site. Detail info. about the MNS is available on 2.2.9 ( see page no. 13) of this manual.

3.6.1RS-232 (DB-9) Console Com port (Serial port) pin assignments.

Pin 1

Pin 5

DB-9 (Console port connector)

Pin	Signal	Description
1	CD	Carrier detect (not used)
2	RXD	Receive Data (input)
3	TXD	Transmit Data (output)
4	open	not used
5	GND	Signal Ground
6-9	open	not used

www . GarrettCom . com

33