GarrettCom 6K32 manual 6KPM Module Description

Page 46

Magnum 6K32 Managed Switch

Installation and User Guide (02/05)

5.26KPM Module Description

An important feature of the Magnum 6K32 is the use of one Port Modules for flexible mixed-media connectivity to RJ-45 and fiber media in the modular slot. Since the Magnum 6K32 Switches have dual-speed capability for copper ports, the 6 or 8-port interfaces are designed to support all standard Ethernet media types at 10 or 100Mps speed. Each 6K32 PM can provide two, four, six or eight ports for connecting Ethernet segments with its individual connector type and media.

For a list of 6K32 Port Module types, refer to Section 1.2

Each 6K PM is individually described in the following sections.

NOTE: The port #1 on the RJ-45 ports on all the modules, either all RJ-45 ports or used for COMBO module is set as (=) as other ports.

5.2.16KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module

The Magnum 6KP6-RJMST is a combo 6 port module of RJ-45’s at

10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual-

mode ST-type connectors and

 

6KP6-RJMST,

 

 

dual speed copper ports. The

 

 

 

4 Port@ 10/100Mbps and 2 @100 Mb ST Fiber Port

 

 

 

ST-connector functions as a

 

 

2

 

 

 

 

fiber optic transceiver to

 

1

3

5

7

 

1

support 100BASE-FX network

 

10/100

 

 

 

LK

 

 

 

 

 

 

 

 

segments. When installed in a

 

F/H

 

 

 

ACT

 

4

ACT

 

ACT

 

 

 

Magnum 6K32 Managed

F/H

 

F/H

TX LK

RX

3

 

2 TX

LKRX

6

 

 

 

 

 

 

Switch, the copper port

1

LINK

 

2

10/100

 

 

supports the standard distance

3

ACTIVITY

4

FULL/HALF

 

100m on each port and the fiber

 

 

 

 

 

 

 

 

port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The

www . GarrettCom . com

40

Image 46
Contents GarrettCom, Inc Corporate HeadquartersTrademarks Contacting GarrettCom, Inc Table of ContentsCanadian Emission Introduction Troubleshooting Personal Switches, 10/100Mb Personal Hubs, 10Mb seriesTechnical Specifications Power Supply Internal Fiber connector types supportedManagement Console connector DC Power Supply OptionsManual switches for modular slot port module only Alarm Contact OptionalAgency Approvals Ordering Information 6KP8-45-2MT 6KP8-45-2SLC LC connectors Gigabit Transceiver optionsIntroduction Inspecting the Package and Product Product Description Magnum 6K32 Managed Switch Magnum 6K32 and 6K32R chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Mode for best fiber distance100Mb fiber eight Port modules for the Magnum @ RJ-45 + 2@ 100Mb SC Eight-Port Copper Module, 6K8-RJ45@ RJ-45 + 2@ 100Mb ST Four-Port 10 Mb mm Fiber ST Modules Gigabit 1000Mbps port modules Packet Prioritization, 802.1p QOSFrame Buffering and Flow Control Managed Network Software MNS-6K for Magnum 6K32 „ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Example 1 Magnum 6K32 Switch for a Vlan application ApplicationsInternet Example 3 Redundant Application InternetSwitch #1 Locating Magnum 6K32 Switches InstallationConnecting Ethernet Media Ieee Standard Media Type Max. Distance Port Module Fiber Connecting Fiber Optic ST-type, twist-lockConnecting Fiber Optic SC-type, Snap-In CopperConnecting Single-Mode Fiber Optic Media Ieee StandardRack-mounting for 19 Retma racks, regular Magnum 6K32s Table-Top or Shelf MountingMagnum 6K32 unit. These Rack-mounting, Reverse version of the Magnum 6K32s 1 Mountings for Magnum 6K32 units rack-mounted in a framePowering the Magnum 6K32 Managed Switch 2 Reverse Magnum 6K32 units, rack- mounted in a frame6K32 Port Module 6KPM Installation Preparation for Installing and Removing 6KPMsRemove Chassis Cover 1a Removing front panel after the screws being removed1b Pulling out the top coved from the chassis base Installing 6KPM Cards in the Magnum 6K32 1d Top View 6KPM retaining screws hold Face PlateSecurely latching up 6KPM Cards into a Magnum 6K32 2g Top View 6KPM Module installed inside a 6K32 Switch Removing 6KPM CardsRemoving a 6KPM Card DB-9 Console port connector Connecting the Console Terminal to Magnum 6K32 ManagementPin Signal Description Console DB-9 PortSwitching Functionality Filtering and ForwardingPWR Status LEDsAuto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 ports ACTWww . GarrettCom . com Flow-control, Ieee 802.3x standard 6KP4 ’cvrMagnum 6K32 Managed Switch Port Modules 6KPM Module Description 1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Magnum 6KP4 Connectors and configuredAs 10Mb Half-duplex by Default for 10Mb fiber Flstfx is a combo fiberCopper ports and 2 Single Mode SC-type connectors. ItEquipped with 4 dual speed Provides an advantage Through combining copperWww . GarrettCom . com Activity FULL/HALF Port@ 100Mbps Multi-Mode Fiber portLink Copper and fiber Small Form Factor Magnum 6KP8-45MTModule is a combo module with Placing more ports on one module9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port 10a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector FX , LC Small-Form-Factor12 6KM-BLNK 11a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC + 2@ 100Mb SC When Calling for Assistance Before Calling for AssistanceReturn Material Authorization RMA Procedure No Problem FoundPower Supply Internal -48VDC Option Appendix B Internal DC Power Supply OptionsB1.0 Specifications for Magnum 6K32 SWITCHES, DC Power Shipping and Packaging InformationPower Supply Internal 125 VDC Option Industrial Applications B3.0 Applications for DC Powered SwitchesB4.1 UL Requirements for DC-powered units B4.0 InstallationB5.0 Operation B7.0 Troubleshooting B6.0 Ordering InformationAppendix C Internal DC Dual-Source Power Option GNDC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 InstallationExample Magnum 6K32R-48VDC C5.1 UL RequirementsC6.0 Ordering Information Example Magnum 6K32R-24VDC or Magnum 6K32R-125VDC