6.5How to display readings
1.The bypass input voltage is displayed immediately after the UPS and Bypass circuit breakers are turned on and has sequenced up to inverter mode as shown in I1. Depressing the “Next Page” button will change to display the utility frequency as shown in J below.
The “b” denotes the reading is for the bypass. The arrow under the LINE indicates the reading is for the bypass input voltage.
Depress the “Next Page” button.
The “r” denotes the reading is for utility. The arrow under the LINE indicates the reading is for the utility frequency.
Depress the “Next Page” button.
The “b” denotes the reading is for the bypass.
Depress the “Next Page” button.
The arrow under the LOAD indicates the reading is for the UPS output voltage.
Depress the “Next Page” button.
The arrow under the LOAD indicates the reading is for the UPS output frequency.
Depress the “Next Page” button.
The arrow under the LOAD indicates the reading is for the UPS output and indicates the percentage of output load connected to the UPS.
22