Enterasys Networks RBT-4102 manual Using the CLI to Configure WPA2 Pre-Shared Key Security

Security

Using the CLI to Configure WPA2 Pre-Shared Key Security

From the interface wireless or interface wireless: VAP configuration modes, use the authentication command to select wpa2‐psk authentication. Use the wpa‐pre‐shared‐key password command to enter a password.

Examples

RoamAbout 4102#

RoamAbout 4102#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 4102(config)#int wireless g

Enter Wireless configuration commands, one per line.

RoamAbout 4102(if-wireless g)#authentication wpa2-psk required

Data Encryption is set to Enabled.

WPA Clients Mode is set to Disabled.

WPA2 Clients Mode is set to Required.

WPA2 Multicast Cipher is set to AES-CCMP.

WPA2 Unicast Ciphers can accept AES-CCMP only.

WPA2 Authentication is set to Pre-Shared Key.

RoamAbout 4102(if-wireless g)#wpa-pre-shared-key pass 1234567890

RoamAbout 4102(if-wireless g)#exit

RoamAbout 4102#

To display the current settings, use the show interface wireless a or the show interface wireless g command from the Executive mode.

Examples

RoamAbout 4102#sho int wireless g

Wireless Interface Information

=========================================================================

----------------Identification	-------------------------------------------: ETS
Description
SSID	: ETS
802.11g band	:	802.11b + 802.11g
Channel	:	6
Status	: Enable
----------------Antenna--------------------------------------------------	: External
Antenna Select
Antenna ID	: 0x0183(Ext. RBTES-BG-S1490M,14dBi)
Ack-TimeOut	:	0	us
----------------802.11 Parameters----------------------------------------
Transmit Power	: FULL (6 dBm)
Automated Data Rate	: ENABLED
Max Station Data Rate	: 54Mbps
Multicast Data Rate	: 1Mbps
Fragmentation Threshold	:	2346 bytes
RTS Threshold	:	2347 bytes
Beacon Interval	:	100 TUs
Association Timeout Interval	:	5	Mins
DTIM Interval	:	2	beacons
Preamble Length	:	LONG
Maximum Association	:	255 stations
Native VLAN ID	:	1
Software Retry Mode	:	DISABLED
Software Retry No	:	3
Hardware Retry No	:	4
----------------Security-------------------------------------------------	: DISABLED
Secure Access

RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-99