TCP / IP Settings
Using Web Management to Configure TCP/IP
Select TCP/IP Settings from the menu.
•DHCP allows you to enable or disable the option to obtain the IP settings for the access point from a DHCP (Dynamic Host Configuration Protocol) server. The IP address, subnet mask, default gateway, and Domain Name Server (DNS) address are dynamically assigned to the access point by the network DHCP server. Default: Enable
Note: Enterasys Networks recommends that you reset the access point after changing the DHCP client status.
•IP Address
–IP Address is the IP address of the access point. Valid IP addresses consist of four decimal numbers, 0 to 255, separated by periods.
–Subnet Mask is the mask that identifies the host address bits used for routing to specific subnets.
–Default Gateway is the IP address of the router for the access point, which is used if the requested destination address is not on the local subnet.