Administration
Upgrading Firmware
You can upgrade the RBT‐4102 software from a local file on the management workstation, or from an FTP or TFTP server. New software may be provided periodically on the Wireless Web site (http://www.enterasys.com/products/wireless).
After upgrading new software, you must reboot the RBT‐4102 to implement the new code. Until a reboot occurs, the RBT‐4102 will continue to run the software it was using before the upgrade started.
Before upgrading new software, verify that the RBT‐4102 is connected to the network and has been configured with a compatible IP address and subnet mask.
Bulk upgrades can be done using Enterasys Networks NetSight Inventory Manager.
If you need to download from an FTP or TFTP server, perform the following additional tasks:
•Obtain the IP address of the FTP or TFTP server where the access point software is stored.
•Verify that the image is in the appropriate directory on the server.
•If upgrading from an FTP server, be sure that you have an account configured on the server with a user name and password.
•If VLANs are configured on the access point, determine the VLAN ID with which the FTP or TFTP server is associated, and then configure the management station, or the network port to which it is attached, with the same VLAN ID. If you are managing the access point from a wireless client, the VLAN ID for the wireless client must be configured on a RADIUS server.