Security
Using the CLI to Configure Local MAC Authentication
Use the mac‐authentication server command from the Interface Wireless or Interface Wireless: VAP configuration modes to enable local MAC authentication. Set the default behavior (allow or deny) for all unknown MAC addresses using the mac‐access permission command. Use the mac‐ access entry command to update the local table by entering, changing and removing MAC addresses.
Examples
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z RoamAbout 4102(config)#interface wireless g
Enter Wireless configuration commands, one per line.
RoamAbout
RoamAbout
This MAC address
RoamAbout
RoamAbout
RoamAbout
To display the current settings, use the show authentication command from the Executive mode.
RoamAbout 4102#show authentication |
|
802.11a Authentication Server Information | Default Local MAC |
VAP AuthMode SessionTimeout Password |
============================================================================
Default | LOCAL | 0 | min | ***** | ALLOWED |
1 | LOCAL | 0 | min | ***** | ALLOWED |
2 | LOCAL | 0 | min | ***** | ALLOWED |
3 | LOCAL | 2 | min | ***** | ALLOWED |
4 | LOCAL | 0 | min | ***** | ALLOWED |
5 | LOCAL | 0 | min | ***** | ALLOWED |
6 | LOCAL | 0 | min | ***** | ALLOWED |
7 | LOCAL | 0 | min | ***** | ALLOWED |
802.11b/g Authentication Server Information | Default Local MAC | ||||
VAP AuthMode SessionTimeout Password |
============================================================================
Default | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
1 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
2 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
3 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
4 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
5 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
6 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
7 | LOCAL | 0 | min | NOPASSWORD | ALLOWED |
802.1x Supplicant Information
============================================================================
802.1x | supplicant | : | DISABLED |
802.1x | supplicant user | : | EMPTY |
802.1x | supplicant password : | EMPTY |
MAC Address Filter Status List in SSID
RoamAbout