Enterasys Networks RBT-4102 manual Snmp

Overview

Table 4-1 Advanced Configuration (continued)

Menu	Description	Page
SNMP	Controls access to this access point from management stations	4-30
	using SNMP, as well as the hosts that will receive trap messages.
Administration	Configures user name and password for management access;	4-39
	upgrades software from local file, FTP, or TFTP server; resets
	configuration settings to factory defaults; and resets the access
	point.
System Log	Controls logging of error messages; sets the system clock via	4-45
	SNTP server or manual configuration.
WDS & STP	Configures bridge mode for each radio interface, and sets spanning	4-50
	tree parameters.
802.11a Interface	Configures the IEEE 802.11a interface.	4-56
Radio Settings	Configures radio signal parameters, and service set parameters for	4-56
	the default interface and up to seven Virtual Access Points (VAPs).
Security	Configures 802.1x client authentication, with an option for MAC	4-78
	address authentication, and data encryption with Wired Equivalent
	Protection (WEP) or Wi-Fi Protected Access (WPA).
802.11b/g Interface	Configures the IEEE 802.11b/g interface.	4-56
Radio Settings	Configures radio signal parameters, and service set parameters for	4-56
	the default interface, Wi-Fi Multimedia (WMM), and up to seven
	Virtual Access Points (VAPs).
Security	Configures 802.1x client authentication, with an option for MAC	4-78
	address authentication, and data encryption with Wired Equivalent
	Protection (WEP) or Wi-Fi Protected Access (WPA).
Status	Displays AP status, CDP status, station status, Neighbor AP	4-101
	Detection status, WDS-STP status, and event logs.

4-2 Advanced Configuration