UPS MAINTENANCE
How to Replace Internal Batteries
C A U T I O N
SPull the battery out onto a flat, stable surface. The battery is unsupported when you pull it out of the UPS.
STo ensure safety and high performance, use only batteries supplied by Eaton.
To replace the UPS internal batteries:
1.Remove the UPS front cover. Press the button on the left side of the cover and then pull the left side (see Figure 25).
1 |
2 |
Figure 25. Removing the UPS Front Cover
2.Disconnect the internal battery connectors (see Figure 26).
1
2
Figure 26. Disconnecting the Internal Battery Connectors
EATON Powerware® 5130 Rack/Tower UPS | 47 |
www.powerware.com