Digi 90000583_A manual Industrial Automation

Page 25

Industrial Automation

The Industrial Automation (IA) Profile allows you to connect IA devices and PLCs to the serial port in order to network-enable the devices. Use this profile if you need to communicate over the network with an IA device or PLC that only uses serial protocols. This profile may also be used to add routing capabilities to IA devices or PLCs that act as serial masters and send packets to various systems or devices on the network. Industrial Automation enhances the IA device or PLC connected to the serial port.

Modem Profiles

There are 3 types of modem profiles:

•Modem Emulation

Modem Emulation allows the Digi device to function as a modem. A short description follow the modem profiles listed below. For more specific information about Modem Emulation see "Special Features: Modem Emulation" on page 43, including AT commands specific to this function.

•Modem

The Modem profile configures the Digi device for attaching a modem to a serial port. For more specific information about the modem profile use the Help button in the upper right corner on the profile page of the web interface.

•Internal Modem

The Internal Modem profile (not listed in the graphic) is specific to the PortServer TS 1/3+Modem devices. The fully functioning

Chapter 3 Configuration

25

Image 25

Contents Digi TS Family 90000583A Chapter Configuration Configuring the IP AddressChapter Introduction Special Features Wireless Setting Up RealPortSpecial Features Embedded Modem Special Features Modem EmulationSpecial Features IA Industrial Automation Special Features Power Over the Serial PortsSpecial Features Snmp Configuration ManagementDigi Contact Information Other Documents in the Library About This GuideSetup Overview Supported Devices About Configuration MethodsFeature Products Availability Configuration Details Accessing the Configuration from the Web InterfaceQuick Find Table DNS Introduction N f i g u r i n g t h e I P a d d r e s s Options for Configuring the IP Address and MaskConfiguring the IP Address Using ARP-Ping Configuring the IP Address with Digi Port Authority-RemoteAccessing the Digi Device Configuring an IP Address using Dhcp and RarpButton in the upper right corner is also available N f i g u r a t i o n Network SettingsProcedure for Using a Name Server Configuring the Serial Ports Service Base Socket Network PortConfiguration Port Profiles TCP Sockets Serial Bridging Printer Industrial Automation Modem Emulation Power Management Custom Feature Description User ConfigurationSnmp SSH Security ConfigurationSystem Configuration Click Outgoing Connections About Autoconnection Configuring a Port for AutoconnectionConfiguring a User for Autoconnection About RealPort T t i n g U p R e a l P o r tSetting Up RealPort Select Discover Digi Device from the CD Configuration ConsiderationsClick Network Wireless LAN Special Features Wireless Special Features Wireless Embedded Modem E c i a l F e a t u r e s E m b e d d e d M o d e mSpecial Features Embedded Modem Modem Emulation E c i a l F e a t u r e s M o d e m E m u l a t i o nSerial Device Digi Device Modem Emulation Cable SignalsScenarios for Modem Emulation Originating, Answering, and Disconnecting CallsATH Modem Emulation AT Command Set Function ResultCode Function ResultATP Mand state without disconnecting There is no Nvram support currently AT+MS Ascii Registers Function Range Units Saved DefaultRegister Function Range Units Saved Default Register Function Range Units Saved Default 17 11h =XON/XOFF &K4 Result Codes Short Long Form Special Features Modem Emulation Configuring RI Power Serial Power FeatureConfiguring DTR Power Serial Power Table OUT Special Features IA Industrial Automation Configuring Industrial Automation with ModbusPage About Snmp and the Device Server Agent E c i a l F e a t u r e s S N M PMIB Configuration Procedure Web InterfaceClick Backup/Restore Restore Copying the Configuration to and from a Remote HostUpgrading the Firmware Resetting Configuration to Defaults Color State Indicates Interpreting the LEDsDevice EIA 232/422/485 Switch Settings Function Safety StatementsRack Mounting Installation PortServer TS 16 Rack and DC Rack External Wiring SpecificationsMechanical PortServer TS PortServer TS 2/4 Mechanical Regulatory Notices Digi One TS, PortServer TS 2/4, PortServer TS 2/4 MEI Certifications Maximum Permissible Exposure Wireless only Digi Contacts Digi Contact Information