Digi 90000583_A manual Mand state without disconnecting

Page 49

	AT	Function	Result
	Command	Function	Code
	Command		Code

		DTR Option. This command interprets the ON to OFF transition of the DTR
		signal from the DTE in accordance with the parameter supplied. The param-
		eter value, if valid, is written to S21 bits 3 and 4. Also see S25.
		&D0 -DTR is ignored (assumed ON). Allows operation with DTEs which
		do not provide DSR.	OK n=0 to 3
	AT&Dn	&D1DTR drop is interpreted by the modem as if the asynchronous escape	OK n=0 to 3
			ERROR
		sequence had been entered. The modem returns to asynchronous com-	ERROR
			Otherwise
		mand state without disconnecting.	Otherwise
		mand state without disconnecting.
		&D2DTR drop causes the modem to hang up. Auto-answer is inhibited.
		(Default.)
		&D3DTR drop causes the modem to perform a soft reset as if the Z com-
		mand were received. The &Y setting determines which profile is loaded.
		Restore Factory Configuration (Profile)
		The Device Server loads the factory default configuration (profile). The fac-	OK n=0 or 1
	AT&Fn	tory defaults are identified for each command and in the S-Register descrip-	OK n=0 or 1
			ERROR
		tions. A configuration (profile) consists of a subset of S-Registers.	ERROR
		&F0Restore factory configuration 0.	Otherwise
		&F0Restore factory configuration 0.
		&F1Restore factory configuration 1.
	AT&Jn	Accepted but ignored.	OK n=0 or 1
	AT&Jn	Accepted but ignored.	ERROR
			Otherwise
	AT&Gn	Accepted but ignored.	OK n=0 or 1
	AT&Gn	Accepted but ignored.	ERROR
			Otherwise
	AT&Jn	Accepted but ignored.	OK n=0 or 1
	AT&Jn	Accepted but ignored.	ERROR
			Otherwise
		Flow control. This command defines the DTE/DCE flow control mechanism.
		The parameter value, if valid, is written to S39 bits 0, 1, and 2.
		&K0 Disables flow control	OK n=0,3,4,5,or 6
	AT&Kn	&K3 Enables RTS/CTS flow control (Default)	OK n=0,3,4,5,or 6
	AT&Kn	&K3 Enables RTS/CTS flow control (Default)	ERROR
		&K4 Enables XON/XOFF flow control	Otherwise
		&K5 Enables transparent XON/XOFF flow control
		&K6 Enables both RTS/CTS and XON/XOFF flow control.
	AT&Ln	Accepted but ignored.	OK n=0, 1, 2
	AT&Ln	Accepted but ignored.	ERROR
			Otherwise
	AT&Mn	Accepted but ignored.	OK n=0, 1, 2
	AT&Mn	Accepted but ignored.	ERROR
			Otherwise
	AT&Pn	Accepted but ignored.	OK n=0, 1, 2
	AT&Pn	Accepted but ignored.	ERROR
			Otherwise
	AT&Qn	Accepted but ignored.	OK n=0 to 8
	AT&Qn	Accepted but ignored.	ERROR
			Otherwise

Chapter 7 Special Features: Modem Emulation

49

Image 49

Contents Digi TS Family 90000583A Chapter Configuration Configuring the IP AddressChapter Introduction Special Features Wireless Setting Up RealPortSpecial Features Embedded Modem Special Features Modem EmulationSpecial Features IA Industrial Automation Special Features Power Over the Serial PortsSpecial Features Snmp Configuration ManagementDigi Contact Information Other Documents in the Library About This GuideSetup Overview Supported Devices About Configuration MethodsFeature Products Availability Configuration Details Accessing the Configuration from the Web InterfaceQuick Find Table DNS Introduction N f i g u r i n g t h e I P a d d r e s s Options for Configuring the IP Address and MaskConfiguring the IP Address Using ARP-Ping Configuring the IP Address with Digi Port Authority-RemoteAccessing the Digi Device Configuring an IP Address using Dhcp and RarpButton in the upper right corner is also available N f i g u r a t i o n Network SettingsProcedure for Using a Name Server Configuring the Serial Ports Service Base Socket Network PortConfiguration Port Profiles TCP Sockets Serial Bridging Printer Industrial Automation Modem Emulation Power Management Custom Feature Description User ConfigurationSnmp SSH Security ConfigurationSystem Configuration Click Outgoing Connections About Autoconnection Configuring a Port for AutoconnectionConfiguring a User for Autoconnection About RealPort T t i n g U p R e a l P o r tSetting Up RealPort Select Discover Digi Device from the CD Configuration ConsiderationsClick Network Wireless LAN Special Features Wireless Special Features Wireless Embedded Modem E c i a l F e a t u r e s E m b e d d e d M o d e mSpecial Features Embedded Modem Modem Emulation E c i a l F e a t u r e s M o d e m E m u l a t i o nSerial Device Digi Device Modem Emulation Cable SignalsScenarios for Modem Emulation Originating, Answering, and Disconnecting CallsATH Modem Emulation AT Command Set Function ResultCode Function ResultATP Mand state without disconnecting There is no Nvram support currently AT+MS Ascii Registers Function Range Units Saved DefaultRegister Function Range Units Saved Default Register Function Range Units Saved Default 17 11h =XON/XOFF &K4 Result Codes Short Long Form Special Features Modem Emulation Configuring RI Power Serial Power FeatureConfiguring DTR Power Serial Power Table OUT Special Features IA Industrial Automation Configuring Industrial Automation with ModbusPage About Snmp and the Device Server Agent E c i a l F e a t u r e s S N M PMIB Configuration Procedure Web InterfaceClick Backup/Restore Restore Copying the Configuration to and from a Remote HostUpgrading the Firmware Resetting Configuration to Defaults Color State Indicates Interpreting the LEDsDevice EIA 232/422/485 Switch Settings Function Safety StatementsRack Mounting Installation PortServer TS 16 Rack and DC Rack External Wiring SpecificationsMechanical PortServer TS PortServer TS 2/4 Mechanical Regulatory Notices Digi One TS, PortServer TS 2/4, PortServer TS 2/4 MEI Certifications Maximum Permissible Exposure Wireless only Digi Contacts Digi Contact Information