Digi 90000583_A manual Upgrading the Firmware, Copying the Configuration to and from a Remote Host

Page 67

Chapter 11

C o n f i g u r a t i o n M a n a g e m e n t

This chapter describes configuration-management activities, including firmware upgrades and restoring the device configuration to defaults.

Upgrading the Firmware

Do not leave your browser until you are prompted to reboot.

Firmware upgrades can be performed from the web interface, using HTTP or FTP.

HTTP or TFTP Upgrade Procedure

If your hardware is okay, make sure you are running the latest firmware version available. Check the Digi Support site for the latest firmware and/or POST updates for your device:

http://ftp.digi.com/support/firmware

1.Download a copy of the firmware file.

2.Access the Digi device server’s web interface by entering the Digi device server’s IP address in a browser’s URL window and log on (User Name root, Password dbps).

3.Choose Update Firmware under Administration from the main menu.

4.Browse to the location on your system where the firmware has been saved, select the correct file, and click Update.

5.Reboot the device when prompted.

6.Access the Digi device server’s web interface and verify on the Information Page that the Firmware version has been successfully updated.

Copying the Configuration to and from a Remote Host

You can copy the configuration to a remote host and from a remote host, which means you can configure the Digi device remotely by entering commands in a text file and then copying the file to the Digi device.

When To Use Remote Configuration

Typically, you use remote configuration when you have several device servers with similar configurations and want to keep a master configuration on a remote host, from which you can easily create variations for downloading to individual device servers.

Download Procedure

1.Access the web interface by entering the device server IP address in a browser’s URL window.

2.Log on to the device server as root. The default password is dbps.

3.From the main menu, choose Backup/Restore > Backup File.

4.Enter the location to save the file and click Save.

5.Access the device to configure.

6.Click Backup/Restore > Restore.

Chapter 11 Configuration Management

67

Image 67
Contents Digi TS Family 90000583A Chapter Configuration Configuring the IP AddressChapter Introduction Special Features Modem Emulation Setting Up RealPortSpecial Features Wireless Special Features Embedded ModemConfiguration Management Special Features Power Over the Serial PortsSpecial Features IA Industrial Automation Special Features SnmpDigi Contact Information Other Documents in the Library About This GuideSetup Overview Supported Devices About Configuration MethodsFeature Products Availability Configuration Details Accessing the Configuration from the Web InterfaceQuick Find Table DNS Introduction N f i g u r i n g t h e I P a d d r e s s Options for Configuring the IP Address and MaskConfiguring the IP Address Using ARP-Ping Configuring the IP Address with Digi Port Authority-RemoteAccessing the Digi Device Configuring an IP Address using Dhcp and RarpButton in the upper right corner is also available N f i g u r a t i o n Network SettingsProcedure for Using a Name Server Configuring the Serial Ports Service Base Socket Network PortConfiguration Port Profiles TCP Sockets Serial Bridging Printer Industrial Automation Modem Emulation Power Management Custom Feature Description User ConfigurationSnmp SSH Security ConfigurationSystem Configuration Click Outgoing Connections About Autoconnection Configuring a Port for AutoconnectionConfiguring a User for Autoconnection About RealPort T t i n g U p R e a l P o r tSetting Up RealPort Select Discover Digi Device from the CD Configuration ConsiderationsClick Network Wireless LAN Special Features Wireless Special Features Wireless Embedded Modem E c i a l F e a t u r e s E m b e d d e d M o d e mSpecial Features Embedded Modem Modem Emulation E c i a l F e a t u r e s M o d e m E m u l a t i o nSerial Device Digi Device Modem Emulation Cable SignalsScenarios for Modem Emulation Originating, Answering, and Disconnecting CallsATH Modem Emulation AT Command Set Function ResultCode Function ResultATP Mand state without disconnecting There is no Nvram support currently AT+MS Ascii Registers Function Range Units Saved DefaultRegister Function Range Units Saved Default Register Function Range Units Saved Default 17 11h =XON/XOFF &K4 Result Codes Short Long Form Special Features Modem Emulation Configuring RI Power Serial Power FeatureConfiguring DTR Power Serial Power Table OUT Special Features IA Industrial Automation Configuring Industrial Automation with ModbusPage About Snmp and the Device Server Agent E c i a l F e a t u r e s S N M PMIB Configuration Procedure Web InterfaceClick Backup/Restore Restore Copying the Configuration to and from a Remote HostUpgrading the Firmware Resetting Configuration to Defaults Color State Indicates Interpreting the LEDsDevice EIA 232/422/485 Switch Settings Function Safety StatementsRack Mounting Installation PortServer TS 16 Rack and DC Rack External Wiring SpecificationsMechanical PortServer TS PortServer TS 2/4 Mechanical Regulatory Notices Digi One TS, PortServer TS 2/4, PortServer TS 2/4 MEI Certifications Maximum Permissible Exposure Wireless only Digi Contacts Digi Contact Information