Digi 90000583_A manual 17 11h

Register		Function	Range	Units	Saved	Default
	General Bit Mapped Options Status
	Indicates the status of command options.
	Default:62 (3Dh) (00111110b)
	Bit 0Grant RDL
	0	=RDL not allowed (&T5) (Default.)
	1	=RDL allowed (&T4)
	Bits 1-3DTE Rate
	0	=0 - 300 bps
	1	=600 bps
	2	=1200 bps				62
S23	3	=2400 bps			*
						(3Dh)
	4	=4800 bps
	5	=9600 bps
	6	=19200 bps
	7	=38400 bps or higher (Default.)
	Bits 4-5Assumed DTE parity
	0	=even
	1	=not used
	2	=odd
	3	=none (Default.)
	Bits 6-7not action applied
S24	Accepted but ignored.		0-255	s	*	0
	Delay to DTR Off
	Sets the length of time that the modem will			s or
S25	ignore DTR for taking the action specified by		0-255			5
	&Dn. Its units are seconds for synchronous			0.01 s
	modes and one hundredths of a second for
	other modes
	RTS-to-CTS Delay
	Sets the time delay, in hundredths of a second,
S26	before the modem turns CTS ON after detect-		0-255	0.01 s		1
	ing an OFF-to-ON transition on RTS when &R0
	is commanded. Pertains to synchronous opera-
	tion only.
S27	General Bit Mapped Options Status		-	-	*	73 (49h)
S28	Accepted but ignored.		-	-	*	0
S29	Accepted but ignored.		0-255	10 ms		70
S30	Accepted but ignored.		0-255	10 s		0
S31	Accepted but ignored.		-	-	*	194
						(C2h)
S32	XON Character		0-255	ASCII		17 (11h)
S33	XOFF Character		0-255	ASCII		19 (13h)
S34	S35 Reserved		-	-		-
S36	Accepted but ignored.		-	-	*	7

Chapter 7 Special Features: Modem Emulation 55