5.Select Enable Dynamic Routing (RIPv1)
6.Select the passive or active route setting.
7.Select the Process ARP requests if appropriate.
8.Click Apply.
9.Click Reboot for changes to take effect.
About Autoconnection
The autoconnection feature allows you to configure a user to access the device server and then be automatically connected to a host on the LAN.
You can implement autoconnection in the following ways:
•By port, where all port users are automatically connected to the same host. The device server is completely transparent to them.
•By user, where a user is required to log on and may be required to supply a password. Once the user is authenticated, an automatic connection to a host is made.
Configuring a Port for Autoconnection
1.Select Serial Ports under Configuration.
2.Click the TCP Sockets Port Profile.
Note: TCP Sockets is the Autoconnection profile.
3.Click Apply.
4.Select Automatically establish TCP connections and the appropriate parameters. Use the Help button for addtional information.
5.Click Apply.
6.Click Reboot for changes to take effect.
Note: To return to the main Ports menu, choose Ports from the Menu again.
Chapter 3 Configuration | 33 |