Digi 90000583_A manual PortServer TS 2/4

Page 74

PortServer TS 2/4 MEI, Digi One TS

Power Requirements

(Standard Models)

2-contact barrel

connector

+9 to +30 VDC 525 mA (max) external power supply

		Environmental

	Ambient	0 to 50° Celsius
	temperature	32 to 122° Fahrenheit

	Ambient	-35 to 70° Celsius
	temperature for	-35 to 70° Celsius
	temperature for	-31 to 158° Fahrenheit
	TS H models	-31 to 158° Fahrenheit
	TS H models

	Relative	5% to 90% non-condensing
	humidity	5% to 90% non-condensing
	humidity

	Altitude	0 to 12,000 feet
	Altitude	0 to 3,658 meters
		0 to 3,658 meters

			Mechanical

	Length		13.31 centimeters
	Length		5.42 inches
			5.42 inches

	Width		8.46 centimeters
	Width		3.3 inches
			3.3 inches

	Height		2.42 centimeters
	Height		.952 inches
			.952 inches

	Weight		64 grams
	Weight		2.25 ounces
			2.25 ounces

PortServer TS 2/4

	Power Requirements
		(Standard Models)

	2-contact barrel		+9 to +30 VDC 525 mA (max)
	connector		external power supply

			Environmental

	Ambient		10 to 55° Celsius
	temperature		50 to 131° Fahrenheit

	Ambient		-25 to 70° Celsius
	temperature for		-25 to 70° Celsius
	temperature for		-13 to 158
	TS H models		-13 to 158
	TS H models

	Relative		5% to 90% non-condensing
	humidity		5% to 90% non-condensing
	humidity

74	Chapter 12 Reference and Certifications

Image 74

Contents Digi TS Family 90000583A Chapter Introduction Configuring the IP AddressChapter Configuration Special Features Embedded Modem Setting Up RealPortSpecial Features Wireless Special Features Modem EmulationSpecial Features Snmp Special Features Power Over the Serial PortsSpecial Features IA Industrial Automation Configuration ManagementDigi Contact Information About This Guide Other Documents in the LibrarySetup Overview About Configuration Methods Supported DevicesQuick Find Table Accessing the Configuration from the Web InterfaceFeature Products Availability Configuration Details DNS Introduction Options for Configuring the IP Address and Mask N f i g u r i n g t h e I P a d d r e s sConfiguring the IP Address with Digi Port Authority-Remote Configuring the IP Address Using ARP-PingConfiguring an IP Address using Dhcp and Rarp Accessing the Digi DeviceButton in the upper right corner is also available Network Settings N f i g u r a t i o nProcedure for Using a Name Server Service Base Socket Network Port Configuring the Serial PortsConfiguration Port Profiles TCP Sockets Serial Bridging Printer Industrial Automation Modem Emulation Power Management Custom User Configuration Feature DescriptionSecurity Configuration Snmp SSHSystem Configuration Click Outgoing Connections Configuring a Port for Autoconnection About AutoconnectionConfiguring a User for Autoconnection T t i n g U p R e a l P o r t About RealPortSetting Up RealPort Configuration Considerations Select Discover Digi Device from the CDClick Network Wireless LAN Special Features Wireless Special Features Wireless E c i a l F e a t u r e s E m b e d d e d M o d e m Embedded ModemSpecial Features Embedded Modem E c i a l F e a t u r e s M o d e m E m u l a t i o n Modem EmulationModem Emulation Cable Signals Serial Device Digi DeviceOriginating, Answering, and Disconnecting Calls Scenarios for Modem EmulationModem Emulation AT Command Set Function Result ATHFunction Result CodeATP Mand state without disconnecting There is no Nvram support currently AT+MS Registers Function Range Units Saved Default AsciiRegister Function Range Units Saved Default Register Function Range Units Saved Default 17 11h =XON/XOFF &K4 Result Codes Short Long Form Special Features Modem Emulation Serial Power Feature Configuring RI PowerConfiguring DTR Power Serial Power Table OUT Configuring Industrial Automation with Modbus Special Features IA Industrial AutomationPage E c i a l F e a t u r e s S N M P About Snmp and the Device Server AgentConfiguration Procedure Web Interface MIBUpgrading the Firmware Copying the Configuration to and from a Remote HostClick Backup/Restore Restore Resetting Configuration to Defaults Interpreting the LEDs Color State IndicatesSafety Statements Device EIA 232/422/485 Switch Settings Function Rack Mounting Installation PortServer TS 16 Rack and DC Rack Specifications External WiringMechanical PortServer TS PortServer TS 2/4 Mechanical Regulatory Notices Digi One TS, PortServer TS 2/4, PortServer TS 2/4 MEI Certifications Maximum Permissible Exposure Wireless only Digi Contact Information Digi Contacts