Digi 90000583_A manual Configuration Considerations, Select Discover Digi Device from the CD

Page 37

Chapter 5

S p e c i a l F e a t u r e s : W i r e l e s s

Use this chapter for the initial configuration of your Digi Wireless device. After the initial configuration, the device can be configured using the same methods as the other Digi TS family products.

Configuration Considerations

The Digi wireless devices work ONLY with the antennae provided. You can use the wizard to configure your wireless device available on the Software and Documentation CD. You will need an Ethernet cable and a network PC to configure the wireless Digi device. After assigning the IP address, access the device from your browser by entering the IP address in the URL address bar.

Using Ethernet

1. Connect serial cable, Ethernet cable, and power supply.

2.Insert the CD in the drive. The configuration wizard will automatically start. Follow the steps in the wizard (either for Microsoft Windows or Unix) to configure the device.

Or:

If you do not want to use the wizard, click Cancel and follow the remaining procedure steps to set up the IP address and configure the device through the web interface.

3.Select Discover Digi Device (from the CD).

4.Select the wireless device and assign the IP address.

5.Click Set IP.

6.Enter the IP address, Subnet, and Gateway mask and click OK.

Chapter 5 Special Features: Wireless

37

Image 37

Contents Digi TS Family 90000583A Chapter Configuration Configuring the IP AddressChapter Introduction Special Features Wireless Setting Up RealPortSpecial Features Embedded Modem Special Features Modem EmulationSpecial Features IA Industrial Automation Special Features Power Over the Serial PortsSpecial Features Snmp Configuration ManagementDigi Contact Information Other Documents in the Library About This GuideSetup Overview Supported Devices About Configuration MethodsFeature Products Availability Configuration Details Accessing the Configuration from the Web InterfaceQuick Find Table DNS Introduction N f i g u r i n g t h e I P a d d r e s s Options for Configuring the IP Address and MaskConfiguring the IP Address Using ARP-Ping Configuring the IP Address with Digi Port Authority-RemoteAccessing the Digi Device Configuring an IP Address using Dhcp and RarpButton in the upper right corner is also available N f i g u r a t i o n Network SettingsProcedure for Using a Name Server Configuring the Serial Ports Service Base Socket Network PortConfiguration Port Profiles TCP Sockets Serial Bridging Printer Industrial Automation Modem Emulation Power Management Custom Feature Description User ConfigurationSnmp SSH Security ConfigurationSystem Configuration Click Outgoing Connections About Autoconnection Configuring a Port for AutoconnectionConfiguring a User for Autoconnection About RealPort T t i n g U p R e a l P o r tSetting Up RealPort Select Discover Digi Device from the CD Configuration ConsiderationsClick Network Wireless LAN Special Features Wireless Special Features Wireless Embedded Modem E c i a l F e a t u r e s E m b e d d e d M o d e mSpecial Features Embedded Modem Modem Emulation E c i a l F e a t u r e s M o d e m E m u l a t i o nSerial Device Digi Device Modem Emulation Cable SignalsScenarios for Modem Emulation Originating, Answering, and Disconnecting CallsATH Modem Emulation AT Command Set Function ResultCode Function ResultATP Mand state without disconnecting There is no Nvram support currently AT+MS Ascii Registers Function Range Units Saved DefaultRegister Function Range Units Saved Default Register Function Range Units Saved Default 17 11h =XON/XOFF &K4 Result Codes Short Long Form Special Features Modem Emulation Configuring RI Power Serial Power FeatureConfiguring DTR Power Serial Power Table OUT Special Features IA Industrial Automation Configuring Industrial Automation with ModbusPage About Snmp and the Device Server Agent E c i a l F e a t u r e s S N M PMIB Configuration Procedure Web InterfaceClick Backup/Restore Restore Copying the Configuration to and from a Remote HostUpgrading the Firmware Resetting Configuration to Defaults Color State Indicates Interpreting the LEDsDevice EIA 232/422/485 Switch Settings Function Safety StatementsRack Mounting Installation PortServer TS 16 Rack and DC Rack External Wiring SpecificationsMechanical PortServer TS PortServer TS 2/4 Mechanical Regulatory Notices Digi One TS, PortServer TS 2/4, PortServer TS 2/4 MEI Certifications Maximum Permissible Exposure Wireless only Digi Contacts Digi Contact Information