Cypress CY7C1415BV18, CY7C1411BV18, CY7C1413BV18, CY7C1426BV18 manual BWS0

CY7C1411BV18, CY7C1426BV18

CY7C1413BV18, CY7C1415BV18

Write Cycle Descriptions

The write cycle description table for CY7C1426BV18 follows. [2, 10]

BWS0

K

K

Comments

L	L–H	–	During the Data portion of a write sequence, the single byte (D[8:0]) is written into the device.
L	–	L–H	During the Data portion of a write sequence, the single byte (D[8:0]) is written into the device.
H	L–H	–	No data is written into the device during this portion of a write operation.
H	–	L–H	No data is written into the device during this portion of a write operation.

Write Cycle Descriptions

The write cycle description table for CY7C1415BV18 follows. [2, 10]

BWS0

BWS1

BWS2

BWS3

K

K

Comments

L	L	L	L	L–H	–	During the Data portion of a write sequence, all four bytes (D[35:0]) are written into
						the device.
L	L	L	L	–	L–H	During the Data portion of a write sequence, all four bytes (D[35:0]) are written into
						the device.
L	H	H	H	L–H	–	During the Data portion of a write sequence, only the lower byte (D[8:0]) is written
						into the device. D[35:9] remains unaltered.
L	H	H	H	–	L–H	During the Data portion of a write sequence, only the lower byte (D[8:0]) is written
						into the device. D[35:9] remains unaltered.
H	L	H	H	L–H	–	During the Data portion of a write sequence, only the byte (D[17:9]) is written into
						the device. D[8:0] and D[35:18] remains unaltered.
H	L	H	H	–	L–H	During the Data portion of a write sequence, only the byte (D[17:9]) is written into
						the device. D[8:0] and D[35:18] remains unaltered.
H	H	L	H	L–H	–	During the Data portion of a write sequence, only the byte (D[26:18]) is written into
						the device. D[17:0] and D[35:27] remains unaltered.
H	H	L	H	–	L–H	During the Data portion of a write sequence, only the byte (D[26:18]) is written into
						the device. D[17:0] and D[35:27] remains unaltered.
H	H	H	L	L–H	–	During the Data portion of a write sequence, only the byte (D[35:27]) is written into
						the device. D[26:0] remains unaltered.
H	H	H	L	–	L–H	During the Data portion of a write sequence, only the byte (D[35:27]) is written into
						the device. D[26:0] remains unaltered.
H	H	H	H	L–H	–	No data is written into the device during this portion of a write operation.
H	H	H	H	–	L–H	No data is written into the device during this portion of a write operation.

Document Number: 001-07037 Rev. *D Page 11 of 30

[+] Feedback