Edimax Technology BR-6478Gn user manual Ttl, ‐2‐2 Static IP

Page 27

Item Name

Description

Host Name

Input the host name of your computer here. This is optional

 

and only required if your ISP asks you to do so.

MAC Address

If your ISP only permits computers with certain MAC

 

addresses to access the Internet, input your computer’s MAC

 

address here. Press “Clone Mac address” to fill the MAC

 

address field with your computer’s MAC address

 

automatically.

DNS Address

Select “Use the following IP address” if your ISP requires that

 

you do so.

DNS Address 1

Enter the primary and secondary DNS addresses assigned by

and 2

your ISP here.

TTL

Enable the “TTL” function if your ISP requires you to do so.

Click “Apply” to save the changes. After you have clicked “Apply”, you will see the following message:

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

3‐2‐2 Static IP

If your ISP is providing you Internet access via a fixed IP address, select “Static IP”. Generally, your ISP will provide you with such information as IP address, subnet mask, gateway address, and DNS address.

26

Image 27
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language Chapter I Product Information ‐1 Package ContentsBack Panel ‐1 Establishing a Network Connection Chapter II System and Network Setup‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser Internet Connection SystemLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page ‐1 System Chapter III General Setup‐1‐1 Time Zone ‐1‐2 Password Settings ‐2 WAN ‐1‐3 Remote Management‐2‐1 Dynamic IP ‐2‐2 Static IP TTL‐2‐3 PPPoE MTU ‐2‐4 Pptp Page ‐2‐5 L2TP BEZEQ‐ISRAELPage MTU ‐2‐6 Wisp ‐3‐1 LAN IP ‐3 LAN‐3‐3 Static Dhcp Leases ‐3‐2 Dhcp ServerPage ‐4‐1 Wireless Settings ‐4 Wireless‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2 Security Settings ‐4‐2‐1 Disabled‐4‐2‐2 WEP ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings Ssid ‐5 Advanced Settings‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6‐1 Virtual Server ‐6 NATPage ‐6‐2 Special Applications ‐6‐4 ALG Settings ‐6‐3 UPnP Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page MAC ‐8 Parental ControlPage ‐1 Status ‐1‐1 Internet Connection‐1‐2 Device Status ‐1‐4 Security Log ‐1‐3 System Log‐1‐5 Active Dhcp Client ‐1‐6 Statistics‐2 Tools ‐2‐1 Configuration Tools ‐2‐3 Restart ‐2‐2 Firmware Upgrade‐3 Language