Edimax Technology BR-6478Gn user manual ‐4 Wireless, ‐4‐1 Wireless Settings

Page 39

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

3‐4 Wireless

You can set up the 2.4GHz wireless LAN connection under “Wireless”.

3‐4‐1 Wireless Settings

Basic 2.4GHz wireless settings can be configured here.

This router can operate in 6 different modes:

zAP: Wireless access point

zStation‐Infrastructure: Acts as both wireless communication client and server

zAP Bridge—Point to Point: Connects this router with another broadband router

zAP Bridge—Point to Multi‐Point: Connects this router with up to 4 other broadband routers

38

Image 39
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language Chapter I Product Information ‐1 Package ContentsBack Panel ‐1 Establishing a Network Connection Chapter II System and Network Setup‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser Internet Connection SystemLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page ‐1 System Chapter III General Setup‐1‐1 Time Zone ‐1‐2 Password Settings ‐2 WAN ‐1‐3 Remote Management‐2‐1 Dynamic IP ‐2‐2 Static IP TTL‐2‐3 PPPoE MTU ‐2‐4 Pptp Page ‐2‐5 L2TP BEZEQ‐ISRAELPage MTU ‐2‐6 Wisp ‐3‐1 LAN IP ‐3 LAN‐3‐3 Static Dhcp Leases ‐3‐2 Dhcp ServerPage ‐4‐1 Wireless Settings ‐4 Wireless‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2 Security Settings ‐4‐2‐1 Disabled‐4‐2‐2 WEP ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings Ssid ‐5 Advanced Settings‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6‐1 Virtual Server ‐6 NATPage ‐6‐2 Special Applications ‐6‐4 ALG Settings ‐6‐3 UPnP Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page MAC ‐8 Parental ControlPage ‐1 Status ‐1‐1 Internet Connection‐1‐2 Device Status ‐1‐4 Security Log ‐1‐3 System Log‐1‐5 Active Dhcp Client ‐1‐6 Statistics‐2 Tools ‐2‐1 Configuration Tools ‐2‐3 Restart ‐2‐2 Firmware Upgrade‐3 Language