4.Please check all the LEDs on the front panel. The “PWR” and “WAN” LEDs should be on. The “LAN” LED should be on if the computer is connected and correctly powered. If you encounter any problems, please make sure that all your devices are connected and powered correctly.
2‐2 Setting Client Computers to Obtain IP Addresses Automatically
Before you start configuration procedures, your computer must be able to get an IP address automatically (set to use dynamic IP addresses). If your computer is set to use a static IP address, or if you are unsure, please follow the following instructions to configure your computer to use dynamic IP addresses:
z | Windows 95/98/Me | (see section 2‐2‐1) |
z | Windows 2000 | (see section 2‐2‐2) |
z | Windows XP | (see section 2‐2‐3) |
z | Windows Vista | (see section 2‐2‐4) |
2‐2‐1 Windows 95/98/Me IP Address Setup
1.Click the “Start” button (it should be located at the lower‐left corner of your screen), then click “Control Panel”. Double‐click the “Network” icon, and the “Network” window will appear. Select “TCP/IP”, and then click “Properties”.
7