Edimax Technology BR-6478Gn user manual ‐4‐2‐3 WPA Pre‐Shared Key

Page 50

Item Name

Description

Key Length

Two types of key lengths are available: 64‐bit and

 

128‐bit.

Key Format

Two types of key formats are available: ASCII and Hex.

 

The number of characters your encryption key can

 

use will be shown here.

Encryption Key

Input an encryption key here. In “ASCII” mode, you

 

can use any alphanumerical character (0‐9, a‐z, and

 

A‐Z). In “Hex” mode, you can use 0‐9, a‐f, and A‐F.

Enable 802.1x

Check this box to enable the 802.1x authentication

Authentication

function. You need a RADIUS server to perform 802.1x

 

authentication.

RADIUS Server IP address

Input the RADIUS server’s IP address here.

RADIUS Server Port

Input the RADIUS server port here. Generally, it is

 

“1812”.

RADIUS Server Password

Input the password of the RADIUS server here.

Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message:

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

3‐4‐2‐3 WPA Pre‐Shared Key

WPA (Wi‐Fi Protected Access) is a safer encryption mode than WEP (recommended).

49

Image 50
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language ‐1 Package Contents Chapter I Product InformationBack Panel Chapter II System and Network Setup ‐1 Establishing a Network Connection‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser System Internet ConnectionLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page Chapter III General Setup ‐1 System‐1‐1 Time Zone ‐1‐2 Password Settings ‐1‐3 Remote Management ‐2 WAN‐2‐1 Dynamic IP TTL ‐2‐2 Static IP‐2‐3 PPPoE MTU ‐2‐4 Pptp Page BEZEQ‐ISRAEL ‐2‐5 L2TPPage MTU ‐2‐6 Wisp ‐3 LAN ‐3‐1 LAN IP‐3‐2 Dhcp Server ‐3‐3 Static Dhcp LeasesPage ‐4 Wireless ‐4‐1 Wireless Settings‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2‐2 WEP ‐4‐2 Security Settings‐4‐2‐1 Disabled ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings ‐5 Advanced Settings Ssid‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6 NAT ‐6‐1 Virtual ServerPage ‐6‐2 Special Applications ‐6‐3 UPnP Settings ‐6‐4 ALG Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page ‐8 Parental Control MACPage ‐1‐2 Device Status ‐1 Status‐1‐1 Internet Connection ‐1‐3 System Log ‐1‐4 Security Log‐2 Tools ‐1‐5 Active Dhcp Client‐1‐6 Statistics ‐2‐1 Configuration Tools ‐2‐2 Firmware Upgrade ‐2‐3 Restart‐3 Language