Idle Time Out | Specify the amount of time the router waits before shutting |
| down an idle connection. This option is only available when |
| “Connect on Demand” is selected. |
Enable Dual‐WAN | Check the “Enable Dual‐WAN Access” box if your ISP requires |
Access | you to do so. |
Click “Apply” to save the changes. After you have clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐2‐4 PPTP
Select “PPTP” if your ISP is providing you Internet access via PPTP (Point‐to‐Point Tunneling Protocol).
If your ISP is providing you dynamic IP addresses, select “Obtain an IP address automatically”. If your ISP is providing you a static IP address, select “Use the following IP address”.
29