Edimax Technology BR-6478Gn user manual ‐5‐4 DMZ

Page 60

 

ending port number in the right field. If only one port

 

number is to be redirected, fill that port number in

 

the left field.

Comment

You can add an optional note in the “Comment” field.

 

Up to 16 alphanumerical characters are supported.

Add

Click “Add” to add the settings to the port forwarding

 

table.

Reset

Click “Reset” to clear all the settings.

Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message:

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

3‐5‐4 DMZ

Adding a device with a private IP address to the DMZ (demilitarized zone) will map the device’s private IP to an Internet IP, so users will be able to access that device over the Internet.

Item Name

Description

Enable DMZ

Check this box to enable the DMZ function.

Public IP Address

If you select “Dynamic IP”, you need to designate a

 

connection session from the dropdown menu. If you

 

select “Static IP”, please input the Internet IP address

 

to which you want to map the private IP address.

Client PC IP Address

Please input the private IP address of the device in the

59

Image 60
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language ‐1 Package Contents Chapter I Product InformationBack Panel Chapter II System and Network Setup ‐1 Establishing a Network Connection‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser System Internet ConnectionLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page Chapter III General Setup ‐1 System‐1‐1 Time Zone ‐1‐2 Password Settings ‐1‐3 Remote Management ‐2 WAN‐2‐1 Dynamic IP TTL ‐2‐2 Static IP‐2‐3 PPPoE MTU ‐2‐4 Pptp Page BEZEQ‐ISRAEL ‐2‐5 L2TPPage MTU ‐2‐6 Wisp ‐3 LAN ‐3‐1 LAN IP‐3‐2 Dhcp Server ‐3‐3 Static Dhcp LeasesPage ‐4 Wireless ‐4‐1 Wireless Settings‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2 Security Settings ‐4‐2‐1 Disabled‐4‐2‐2 WEP ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings ‐5 Advanced Settings Ssid‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6 NAT ‐6‐1 Virtual ServerPage ‐6‐2 Special Applications ‐6‐3 UPnP Settings ‐6‐4 ALG Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page ‐8 Parental Control MACPage ‐1 Status ‐1‐1 Internet Connection‐1‐2 Device Status ‐1‐3 System Log ‐1‐4 Security Log‐1‐5 Active Dhcp Client ‐1‐6 Statistics‐2 Tools ‐2‐1 Configuration Tools ‐2‐2 Firmware Upgrade ‐2‐3 Restart‐3 Language