Edimax Technology BR-6478Gn user manual Essid

Page 42

Item Name

Description

Band

Select from one of the following options:

 

2.4GHz (B): Allows 802.11b wireless network clients

 

to connect to this router.

 

2.4GHz (N): Allows 802.11n wireless network clients

 

to connect to this router.

 

2.4GHz (B+G): Allows 802.11b and 802.11g wireless

 

network clients to connect to this router.

 

2.4GHz (G): Allows 802.11g wireless network clients

 

to connect to this router.

 

2.4GHz (B+G+N): Allows 802.11b, 802.11g, and

 

802.11n wireless clients to connect to this router

 

(recommended).

ESSID

This is the name of your router. You can type any

 

alphanumerical character here (maximum 32

 

characters).

Site Survey

Click “Select Site Survey” and a pop‐up window will

 

appear. All reachable wireless access points will be

 

shown in the window. Select a wireless access point

 

from the list, and click “Done” to establish a

 

connection. Clicking “Refresh” will renew the list.

Wireless Module

Select “Enable” to turn on the 2.4GHz wireless

 

signal and select “Disable” to turn it off.

Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message:

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

41

Image 42
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language ‐1 Package Contents Chapter I Product InformationBack Panel Chapter II System and Network Setup ‐1 Establishing a Network Connection‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser System Internet ConnectionLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page Chapter III General Setup ‐1 System‐1‐1 Time Zone ‐1‐2 Password Settings ‐1‐3 Remote Management ‐2 WAN‐2‐1 Dynamic IP TTL ‐2‐2 Static IP‐2‐3 PPPoE MTU ‐2‐4 Pptp Page BEZEQ‐ISRAEL ‐2‐5 L2TPPage MTU ‐2‐6 Wisp ‐3 LAN ‐3‐1 LAN IP‐3‐2 Dhcp Server ‐3‐3 Static Dhcp LeasesPage ‐4 Wireless ‐4‐1 Wireless Settings‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2 Security Settings ‐4‐2‐1 Disabled‐4‐2‐2 WEP ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings ‐5 Advanced Settings Ssid‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6 NAT ‐6‐1 Virtual ServerPage ‐6‐2 Special Applications ‐6‐3 UPnP Settings ‐6‐4 ALG Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page ‐8 Parental Control MACPage ‐1 Status ‐1‐1 Internet Connection‐1‐2 Device Status ‐1‐3 System Log ‐1‐4 Security Log‐1‐5 Active Dhcp Client ‐1‐6 Statistics‐2 Tools ‐2‐1 Configuration Tools ‐2‐2 Firmware Upgrade ‐2‐3 Restart‐3 Language